CTRON-AppleTalk-ROUTER-MIB :: nwAtProtoIfCtrAdminSTATUS

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-AppleTalk-ROUTER-MIBnwAtProtoIfCtrAdminSTATUS

nwAtProtoIfCtrAdminSTATUS

Module: CTRON-AppleTalk-ROUTER-MIB

OID (symbolic): CTRON-AppleTalk-ROUTER-MIB::nwAtProtoIfCtrAdminSTATUS

OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Sets the administrative state of the AppleTalk packet and byte counters on the router port for which the entry exists. enabled(3) causes these counters to become active on the configured AppleTalk router port. disabled(2) causes these counters to become inactive on the configured AppleTalk router port.

What is nwAtProtoIfCtrAdminSTATUS?

This read-write INTEGER (other/disabled/enabled) sets the administrative state of the AppleTalk routing-protocol packet and byte counters on a specific router port, with enabled(3) activating them there and disabled(2) deactivating them. An administrator enables it to gather routing-protocol traffic statistics for just one port during a focused investigation. Setting nwAtProtoIfCtrAdminSTATUS to enabled(3) on a single suspect port isolates its route-update traffic measurement from the rest of the device.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.2
snmpwalk -v2c -c public <target> CTRON-AppleTalk-ROUTER-MIB::nwAtProtoIfCtrAdminSTATUS

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.2.1
snmpget -v2c -c public <target> CTRON-AppleTalk-ROUTER-MIB::nwAtProtoIfCtrAdminSTATUS.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.2.1 i <value>

Start monitoring Cabletron Systems router (AppleTalk, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-AppleTalk-ROUTER-MIB::nwAtProtoIfCtrAdminSTATUS OID value, configure state conditions and alerts, and monitor any Cabletron Systems router (AppleTalk, legacy) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.2ctronRouterExpROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2nwRouterROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2.3nwRtrProtoSuitesROUTER-OIDS
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.2.2.3.4nwAtRouterCTRON-AppleTalk-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.4.2nwAtComponentsCTRON-AppleTalk-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.4.2.4nwAtTopologyCTRON-AppleTalk-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1nwAtDistanceVectorCTRON-AppleTalk-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1nwAtProtoCTRON-AppleTalk-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2nwAtProtoInterfaceCTRON-AppleTalk-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2nwAtProtoIfCountersCTRON-AppleTalk-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1nwAtProtoIfCtrTableCTRON-AppleTalk-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1nwAtProtoIfCtrEntryCTRON-AppleTalk-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.2.1.1.2nwAtProtoIfCtrAdminSTATUSCTRON-AppleTalk-ROUTER-MIB