All MIBs › CTRON-AppleTalk-ROUTER-MIB › nwAtEventFltrSeverity
nwAtEventFltrSeverity
Module: CTRON-AppleTalk-ROUTER-MIB
OID (symbolic): CTRON-AppleTalk-ROUTER-MIB::nwAtEventFltrSeverity
OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies the level of severity an event must meet in order to be logged. Controls the amount of event logging by ignoring events of a lower priority than specified by this filter value. `Highmed' ignores only events of the lowest severity. `Highlow' logs all events highest priority through lowest. `Highest' severity causes all events except those of the highest severity to be ignored. `Highmed' severity is the default setting which causes only events of the lowest severity to be ignored. `Highlow' severity logs all events, regardless of severity.
What is nwAtEventFltrSeverity?
This read-write enumerated value sets the severity threshold -- highest, highmed, or highlow -- that an AppleTalk event must meet before this filter allows it to be logged. Choosing highest suppresses all but the most critical events, while highlow logs everything, letting an admin balance signal against noise depending on how much detail they need while troubleshooting. For example, during normal operation an admin might leave this at the default highmed to log medium-and-higher severity events, then temporarily switch to highlow when actively debugging an AppleTalk routing fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.5 snmpwalk -v2c -c public <target> CTRON-AppleTalk-ROUTER-MIB::nwAtEventFltrSeverity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.5.1 snmpget -v2c -c public <target> CTRON-AppleTalk-ROUTER-MIB::nwAtEventFltrSeverity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.5.1 i <value>
Start monitoring Cabletron Systems router (AppleTalk, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-AppleTalk-ROUTER-MIB::nwAtEventFltrSeverity OID value, configure state conditions and alerts, and monitor any Cabletron Systems router (AppleTalk, legacy) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.2 | ctronExp | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.2.2 | ctronRouterExp | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2 | nwRouter | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2.3 | nwRtrProtoSuites | ROUTER-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.2.2.2.3.4 | nwAtRouter | CTRON-AppleTalk-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2 | nwAtComponents | CTRON-AppleTalk-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10 | nwAtEvent | CTRON-AppleTalk-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2 | nwAtEventLogFilterTable | CTRON-AppleTalk-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1 | nwAtEventFilterTable | CTRON-AppleTalk-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1 | nwAtEventFilterEntry | CTRON-AppleTalk-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.4.2.10.2.1.1.5 | nwAtEventFltrSeverity | CTRON-AppleTalk-ROUTER-MIB |