CTRON-AppleTalk-ROUTER-MIB :: nwAtAclPermission

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-AppleTalk-ROUTER-MIBnwAtAclPermission

nwAtAclPermission

Module: CTRON-AppleTalk-ROUTER-MIB

OID (symbolic): CTRON-AppleTalk-ROUTER-MIB::nwAtAclPermission

OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies whether access is allowed or denied between the source and destination address pairs. Note that source and destination are interchangeable when bi-directional control is selected. To remove an existing entry set invalid (2), and it will disappear after reboot.

What is nwAtAclPermission?

This read-write INTEGER (other/invalid/permit/deny/permit-bidirectional and more) specifies whether access is allowed or denied between a source and destination address pair in an AppleTalk ACL entry, and setting it to invalid(2) marks the entry for removal after the next reboot. An administrator sets it to permit(3) or deny(4) to actually define the rule's effect on matching traffic. Setting nwAtAclPermission to deny(4) on an entry matching a particular AppleTalk zone blocks traffic between that zone and the rule's other specified address.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.3
snmpwalk -v2c -c public <target> CTRON-AppleTalk-ROUTER-MIB::nwAtAclPermission

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.3.1
snmpget -v2c -c public <target> CTRON-AppleTalk-ROUTER-MIB::nwAtAclPermission.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.3.1 i <value>

Start monitoring Cabletron Systems router (AppleTalk, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-AppleTalk-ROUTER-MIB::nwAtAclPermission OID value, configure state conditions and alerts, and monitor any Cabletron Systems router (AppleTalk, legacy) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.2ctronRouterExpROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2nwRouterROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2.3nwRtrProtoSuitesROUTER-OIDS
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.2.2.3.4nwAtRouterCTRON-AppleTalk-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.4.2nwAtComponentsCTRON-AppleTalk-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.4.2.7nwAtAccessControlCTRON-AppleTalk-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2nwAtAclTableCTRON-AppleTalk-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1nwAtAclEntryCTRON-AppleTalk-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.4.2.7.2.1.3nwAtAclPermissionCTRON-AppleTalk-ROUTER-MIB