All MIBs › CTRON-APPN-MIB › nwAppnSysRouterId
nwAppnSysRouterId
Module: CTRON-APPN-MIB
OID (symbolic): CTRON-APPN-MIB::nwAppnSysRouterId
OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.1
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: Specifies the APPN Fully-Qualified Control Point name that is used to uniquely identify APPN Routing Services in an APPN network. The name format is NNNNNNNN.CCCCCCCC where NNNNNNNN is the network identifier and CCCCCCCC is the Control Point name. Valid characters to make up these two strings are uppercase letters A through Z, numerics 0 through 9, and the special characters $, @, and #. The first character of the string must NOT be numeric. Each string must be a maximum length of 8 characters with no embedded spaces and the strings are joined by a dot. nwAppnSysRouterId cannot be modified while APPN routing services is in any operational state other than DISABLED as reflected in nwAppnSysOperStatus. Otherwise, the request will be rejected.
What is nwAppnSysRouterId?
This read-write string (3-17 characters) holds the fully-qualified APPN Control Point name in NETID.CPNAME format that uniquely identifies this router's APPN Routing Services in the network. It must be set before APPN Routing Services can be enabled for the first time, making it the foundational identity setting for the whole feature. An admin standing up a new branch router might set this to USIBM.RTR07 to register it uniquely within the corporate APPN network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.1 snmpwalk -v2c -c public <target> CTRON-APPN-MIB::nwAppnSysRouterId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.1.1 snmpget -v2c -c public <target> CTRON-APPN-MIB::nwAppnSysRouterId.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.1.1 s <value>
Start monitoring Cabletron/Enterasys router (IBM SNA/APPN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-APPN-MIB::nwAppnSysRouterId OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys router (IBM SNA/APPN) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.2 | ctronExp | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.2.2 | ctronRouterExp | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2 | nwRouter | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2.3 | nwRtrProtoSuites | ROUTER-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.2.2.2.3.5 | nwAppnRouter | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2 | nwAppnComponents | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1 | nwAppnSystem | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1 | nwAppnSysConfig | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.1 | nwAppnSysRouterId | CTRON-APPN-MIB |