All MIBs › CTRON-APPN-MIB › nwAppnSysCpName
nwAppnSysCpName
Module: CTRON-APPN-MIB
OID (symbolic): CTRON-APPN-MIB::nwAppnSysCpName
OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1.1.1
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: Specifies the fully qualified name of the Control Point containing the LU being defined. The format of this name is NNNNNNNN.CCCCCCCC where NNNNNNNN is the network identifier and CCCCCCCC is the LU or Control Point name. Valid characters to make up these two strings are uppercase letters A through Z, numerics 0 through 9 and the special charcters $, @, and #. The first character of the name must NOT be numeric. Each string must be a maximum length of 8 characters with no embedded spaces and the strings are joined by a dot. This CP name must appear as an Adjacent CP in a link station definition where the adjacent CP type is EN and CP-CP session support is NO.
What is nwAppnSysCpName?
This read-write string (3-17 characters) specifies the fully-qualified Control Point name, in NETID.CPNAME format, that contains the LU currently being defined. This value scopes an LU registration to a particular Control Point, which matters when a single router manages LUs on behalf of multiple logical CPs. An admin defining an LU for a downstream PU would set this to that PU's owning CP, such as USIBM.HOSTCP1.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1.1.1 snmpwalk -v2c -c public <target> CTRON-APPN-MIB::nwAppnSysCpName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1.1.1.1 snmpget -v2c -c public <target> CTRON-APPN-MIB::nwAppnSysCpName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1.1.1.1 s <value>
Start monitoring Cabletron/Enterasys router (IBM SNA/APPN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-APPN-MIB::nwAppnSysCpName OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys router (IBM SNA/APPN) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.2 | ctronExp | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.2.2 | ctronRouterExp | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2 | nwRouter | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2.3 | nwRtrProtoSuites | ROUTER-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.2.2.2.3.5 | nwAppnRouter | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2 | nwAppnComponents | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1 | nwAppnSystem | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1 | nwAppnSysConfig | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3 | nwAppnSysCfgTables | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1 | nwAppnSysLuTable | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1.1 | nwAppnSysLuEntry | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1.1.1 | nwAppnSysCpName | CTRON-APPN-MIB |