All MIBs › CTRON-APPN-MIB › nwAppnSysAdminStatus
nwAppnSysAdminStatus
Module: CTRON-APPN-MIB
OID (symbolic): CTRON-APPN-MIB::nwAppnSysAdminStatus
OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Sets the system-wide administrative state of APPN Routing Services. If enable(3) is selected, APPN Routing Services is activated.
There are two cases: the very first activation, and activations subsequent to the successful first activation. Before activating APPN Routing Services the very first time, nwAppnSysRouterId in the System Configuration branch and all objects under nwAppnSysCfgLocalNode must be assigned a value. If not explicitly assigned, default values will be used for objects under nwAppnSysCfgLocalNode. After this first activation has completed successfully, all objects under nwAppnSysCfgLocalNode will be saved in non-volatile RAM and restored for the next node activation at power up time. After this subsequent power up, enable(3) may be selected without setting nwAppnSysRouterId or any objects under under nwAppnSysCfgLocalNode. Those values defined prior to the last power up or reset will be used.
If disable(2) is selected, APPN Routing Services will become inactive in the manner specifed by nwAppnSysStopType. To modify objects under nwAppnSysCfgLocalNode, nwAppnSysAdminStatus must be disabled.
What is nwAppnSysAdminStatus?
This read-write enumeration sets the system-wide administrative state of APPN Routing Services to other(1), disable(2), or enabled(3), and enabling(3) is what actually activates the feature. Before the very first activation, nwAppnSysRouterId and all local-node configuration objects must already be set, or the enable attempt will fail to bring up routing services properly. An admin bringing up APPN on a router for the first time sets nwAppnSysRouterId, configures the local node branch, and only then sets this object to enabled(3).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.2.1 snmpwalk -v2c -c public <target> CTRON-APPN-MIB::nwAppnSysAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.2.1.1 snmpget -v2c -c public <target> CTRON-APPN-MIB::nwAppnSysAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.2.1.1 i <value>
Start monitoring Cabletron/Enterasys router (IBM SNA/APPN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-APPN-MIB::nwAppnSysAdminStatus OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys router (IBM SNA/APPN) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.2 | ctronExp | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.2.2 | ctronRouterExp | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2 | nwRouter | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2.3 | nwRtrProtoSuites | ROUTER-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.2.2.2.3.5 | nwAppnRouter | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2 | nwAppnComponents | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1 | nwAppnSystem | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.2 | nwAppnSysAdministration | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.2.1 | nwAppnSysAdminStatus | CTRON-APPN-MIB |