All MIBs › CTRON-APPN-MIB › nwAppnIfCnTgPropDelay
nwAppnIfCnTgPropDelay
Module: CTRON-APPN-MIB
OID (symbolic): CTRON-APPN-MIB::nwAppnIfCnTgPropDelay
OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies the propagation delay which represents the time it takes for a signal to travel the length of the link in microseconds, with some of the more common default values enumerated. The default times in parentheses are in microseconds. These default values fall into the following ranges:
minimum - no propagation delay negligible, lan - less than 480 microseconds terrestrial, telephone - between 480 and 49,512 microseconds packetswitched - between 49,512 and 245,760 microseconds long, satellite - more than 245760 microseconds. maximum - the maximum propagation delay.
What is nwAppnIfCnTgPropDelay?
This read-write enumeration sets the propagation delay category attributed to the Connection Network, choosing among preset values like minimum(0), negligible(384), and terrestrial(9216) microseconds. Since a LAN-based connection network typically has very low latency, this value is usually set toward the negligible end of the scale, unlike a WAN-based connection network. An admin modeling a local Ethernet segment as a connection network would leave this at or near negligible(384) rather than a WAN-scale delay value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.6 snmpwalk -v2c -c public <target> CTRON-APPN-MIB::nwAppnIfCnTgPropDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.6.1 snmpget -v2c -c public <target> CTRON-APPN-MIB::nwAppnIfCnTgPropDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.6.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> nwAppnIfCnTgPropDelay.1
Start monitoring Cabletron/Enterasys router (IBM SNA/APPN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-APPN-MIB::nwAppnIfCnTgPropDelay OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys router (IBM SNA/APPN) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.2 | ctronExp | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.2.2 | ctronRouterExp | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2 | nwRouter | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2.3 | nwRtrProtoSuites | ROUTER-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.2.2.2.3.5 | nwAppnRouter | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2 | nwAppnComponents | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2 | nwAppnForwarding | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2 | nwAppnFwdInterfaces | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1 | nwAppnFwdIfConfig | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3 | nwAppnIfCn | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2 | nwAppnIfCnTgCharTable | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1 | nwAppnIfCnTgCharEntry | CTRON-APPN-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.6 | nwAppnIfCnTgPropDelay | CTRON-APPN-MIB |