CTRON-APPN-MIB :: nwAppnIfCnTgFqName

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-APPN-MIBnwAppnIfCnTgFqName

nwAppnIfCnTgFqName

Module: CTRON-APPN-MIB

OID (symbolic): CTRON-APPN-MIB::nwAppnIfCnTgFqName

OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.1

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: Specifies the fully-qualified Name of the Virtual Routing Node. The name format is NNNNNNNN.CCCCCCCC where NNNNNNNN is the network identifier and CCCCCCCC is the Control Point name. Valid characters to make up these two strings are uppercase letters A through Z, numerics 0 through 9, and the special characters #, $, and @. The first character of the name must NOT be numeric. Each string must be a maximum length of 8 characters with no embedded spaces and the strings are joined by a dot.

What is nwAppnIfCnTgFqName?

This read-write string (3-17 characters) specifies the fully-qualified NETID.CPNAME of the Virtual Routing Node for this Connection Network transmission group entry. It anchors the transmission-group-level cost and capacity parameters that follow in this table to a specific Connection Network's virtual node. An admin defining routing costs for a shared LAN's connection network would first confirm this name matches the connection network's registered identity.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.1
snmpwalk -v2c -c public <target> CTRON-APPN-MIB::nwAppnIfCnTgFqName

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.1.1
snmpget -v2c -c public <target> CTRON-APPN-MIB::nwAppnIfCnTgFqName.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.1.1 s <value>

Start monitoring Cabletron/Enterasys router (IBM SNA/APPN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-APPN-MIB::nwAppnIfCnTgFqName OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys router (IBM SNA/APPN) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.2ctronRouterExpROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2nwRouterROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2.3nwRtrProtoSuitesROUTER-OIDS
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.2.2.3.5nwAppnRouterCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2nwAppnComponentsCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2nwAppnForwardingCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2nwAppnFwdInterfacesCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1nwAppnFwdIfConfigCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3nwAppnIfCnCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2nwAppnIfCnTgCharTableCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1nwAppnIfCnTgCharEntryCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.1nwAppnIfCnTgFqNameCTRON-APPN-MIB