CTRON-APPN-MIB :: nwAppnFwdLsPuName

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-APPN-MIBnwAppnFwdLsPuName

nwAppnFwdLsPuName

Module: CTRON-APPN-MIB

OID (symbolic): CTRON-APPN-MIB::nwAppnFwdLsPuName

OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.13

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: Specifies the name of the local PU if nwAppnFwdLsSscpSession is set to yes. Valid characters are uppercase A through Z and numerics 0 through 9. The name must start with an alphabetic character. Note: once this parameter is set along with other link station parameters associated with a link station definition, it cannot be modified. In order to change it, the link station definition itself must be deleted and then redefined with the new parameter.

What is nwAppnFwdLsPuName?

This read-write string (1-8 characters, starting with an alphabetic character) specifies the name of the local PU used when nwAppnFwdLsSscpSession is set to yes, and like that setting, it cannot be changed without deleting and redefining the link station once set. This name is what the host references when establishing SSCP-PU sessions with the dependent devices reachable over this link. An admin supporting a legacy 3270 controller over this link would set this to that controller's registered PU name, such as PU0007.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.13
snmpwalk -v2c -c public <target> CTRON-APPN-MIB::nwAppnFwdLsPuName

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.13.1
snmpget -v2c -c public <target> CTRON-APPN-MIB::nwAppnFwdLsPuName.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.13.1 s <value>

Start monitoring Cabletron/Enterasys router (IBM SNA/APPN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-APPN-MIB::nwAppnFwdLsPuName OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys router (IBM SNA/APPN) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.2ctronRouterExpROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2nwRouterROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2.3nwRtrProtoSuitesROUTER-OIDS
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.2.2.3.5nwAppnRouterCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2nwAppnComponentsCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2nwAppnForwardingCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3nwAppnFwdLinksCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1nwAppnFwdLsConfigCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1nwAppnFwdLsTableCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1nwAppnFwdLsEntryCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.13nwAppnFwdLsPuNameCTRON-APPN-MIB