CTRON-APPN-MIB :: nwAppnExtIfOutbLsActLim

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-APPN-MIBnwAppnExtIfOutbLsActLim

nwAppnExtIfOutbLsActLim

Module: CTRON-APPN-MIB

OID (symbolic): CTRON-APPN-MIB::nwAppnExtIfOutbLsActLim

OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies the total number of outbound links that can be active on this port. If nwAppnExtIfPortType = nonswitched(1) and nwAppnExtIfLocalLsRole = negotiable(1), then this value must be set to 0. If nwAppnExtIfLocalLsRole = primary(2), then this value must be set the same as nwAppnExtIfTotLsActLim.

What is nwAppnExtIfOutbLsActLim?

This read-write integer (0-256) caps the total number of outbound links active on this port, with specific required values depending on port type and local role: 0 for nonswitched negotiable roles, or equal to nwAppnExtIfTotLsActLim for primary roles. This governs how many links this router itself may initiate outward on the port, as distinct from links initiated by the far end. An admin configuring a primary-role dial-out port would set this equal to the total link limit, since all links originate from this side.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.9
snmpwalk -v2c -c public <target> CTRON-APPN-MIB::nwAppnExtIfOutbLsActLim

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.9.1
snmpget -v2c -c public <target> CTRON-APPN-MIB::nwAppnExtIfOutbLsActLim.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.9.1 i <value>

Start monitoring Cabletron/Enterasys router (IBM SNA/APPN) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-APPN-MIB::nwAppnExtIfOutbLsActLim OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys router (IBM SNA/APPN) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.2ctronRouterExpROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2nwRouterROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2.3nwRtrProtoSuitesROUTER-OIDS
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.2.2.3.5nwAppnRouterCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2nwAppnComponentsCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2nwAppnForwardingCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2nwAppnFwdInterfacesCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1nwAppnFwdIfConfigCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2nwAppnExtensionTableCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1nwAppnExtEntryCTRON-APPN-MIB
1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.9nwAppnExtIfOutbLsActLimCTRON-APPN-MIB