All MIBs › CTRON-ALIAS-MIB › ctAliasConfigurationInterfaceMaxEntries
ctAliasConfigurationInterfaceMaxEntries
Module: CTRON-ALIAS-MIB
OID (symbolic): CTRON-ALIAS-MIB::ctAliasConfigurationInterfaceMaxEntries
OID (numeric): 1.3.6.1.4.1.52.4.1.3.7.1.1.4.3.1.2
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-write
Description: This object represents the maximum number of alias entries in the ctAliasTable which were created by this ctAliasInterface. When the object ctAliasConfigurationInterfaceTotalEntries equals this object, the next alias appearing on this ctAliasInterface causes the oldest entry created by this ctAliasInterface to be deleted. The sum of this object across all ctAliasInterface shall not exceed ctAliasConfigurationSystemTotalEntries. If the value of this object is increased, then oldest entry removal ceases until the maximum is reached again. If management reduces the value of this object, then, starting with the oldest, alias entries are removed until the new number of entries is reached.
What is ctAliasConfigurationInterfaceMaxEntries?
This read-write Gauge32 sets the maximum number of alias entries this particular ctAliasInterface is allowed to create, after which the oldest entry from that same interface gets evicted to make room for a new one. An admin uses this per-interface cap to prevent one busy or noisy port from monopolizing the device's shared pool of alias-table space, keeping in mind the sum across all interfaces can't exceed the system-wide total. For example, an admin might lower ctAliasConfigurationInterfaceMaxEntries on a guest-access port so it can't crowd out alias entries needed for core infrastructure ports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.3.7.1.1.4.3.1.2 snmpwalk -v2c -c public <target> CTRON-ALIAS-MIB::ctAliasConfigurationInterfaceMaxEntries
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.3.7.1.1.4.3.1.2.1 snmpget -v2c -c public <target> CTRON-ALIAS-MIB::ctAliasConfigurationInterfaceMaxEntries.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.3.7.1.1.4.3.1.2.1 i <value>
Start monitoring Cabletron Systems/Enterasys switch (Node Alias feature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-ALIAS-MIB::ctAliasConfigurationInterfaceMaxEntries OID value, configure state conditions and alerts, and monitor any Cabletron Systems/Enterasys switch (Node Alias feature) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.3 | ctNetwork | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.3.7 | ctAliasMib | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.3.7.1 | cabletronAliasMib | CTRON-ALIAS-MIB |
| 1.3.6.1.4.1.52.4.1.3.7.1.1 | ctAlias | CTRON-ALIAS-MIB |
| 1.3.6.1.4.1.52.4.1.3.7.1.1.4 | ctAliasConfiguration | CTRON-ALIAS-MIB |
| 1.3.6.1.4.1.52.4.1.3.7.1.1.4.3 | ctAliasConfigurationTable | CTRON-ALIAS-MIB |
| 1.3.6.1.4.1.52.4.1.3.7.1.1.4.3.1 | ctAliasConfigurationEntry | CTRON-ALIAS-MIB |
| 1.3.6.1.4.1.52.4.1.3.7.1.1.4.3.1.2 | ctAliasConfigurationInterfaceMaxEntries | CTRON-ALIAS-MIB |