All MIBs › CTATM-CONFIG-MIB › ctATMSignalRestart
ctATMSignalRestart
Module: CTATM-CONFIG-MIB
OID (symbolic): CTATM-CONFIG-MIB::ctATMSignalRestart
OID (numeric): 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this object to restart will restart signalling on this interface. Reading this object always returns a 1.
What is ctATMSignalRestart?
This read-write INTEGER, whose only defined value is restart(1) and which always reads back as 1, is a write-triggered action that restarts signaling on this interface. An admin uses this to force the signaling stack to reinitialize without a full interface reboot, for example after clearing a stuck SVC setup. For example, setting this to restart(1) after observing ctATMSignalQsaalStatus stuck down forces the signaling layers to reinitialize and attempt to come back up.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.6 snmpwalk -v2c -c public <target> CTATM-CONFIG-MIB::ctATMSignalRestart
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.6.1 snmpget -v2c -c public <target> CTATM-CONFIG-MIB::ctATMSignalRestart.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.6.1 i <value>
Start monitoring Cabletron/Enterasys ATM switch (interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATM-CONFIG-MIB::ctATMSignalRestart OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATM switch (interface config) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.10 | ctATM | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.10.1 | ctATMConfig | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.10.1.4 | ctATMSignalConfig | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.4.1 | ctATMSignalTable | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1 | ctATMSignalEntry | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.6 | ctATMSignalRestart | CTATM-CONFIG-MIB |