CTATM-CONFIG-MIB :: ctATMSignalQsaalStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTATM-CONFIG-MIBctATMSignalQsaalStatus

ctATMSignalQsaalStatus

Module: CTATM-CONFIG-MIB

OID (symbolic): CTATM-CONFIG-MIB::ctATMSignalQsaalStatus

OID (numeric): 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: If ctATMSignalType is other than spans, then the value of this object is the state of the layer-2 signalling stack (Q.SAAL) on this interface.

What is ctATMSignalQsaalStatus?

This read-only INTEGER, up or down, meaningful only when ctATMSignalType is something other than spans, reports the state of the layer-2 (Q.SAAL) signaling stack on this interface. An admin checks this as a lower-layer prerequisite to layer-3 signaling when diagnosing SVC setup failures. For example, seeing Q.SAAL down(2) explains why ctATMSignalQ93Status also reports down, since the layer-3 signaling stack depends on Q.SAAL being up first.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.5
snmpwalk -v2c -c public <target> CTATM-CONFIG-MIB::ctATMSignalQsaalStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.5.1
snmpget -v2c -c public <target> CTATM-CONFIG-MIB::ctATMSignalQsaalStatus.1

Start monitoring Cabletron/Enterasys ATM switch (interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATM-CONFIG-MIB::ctATMSignalQsaalStatus OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATM switch (interface config) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.1ctronCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.2ctDataLinkCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.2.10ctATMCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.2.10.1ctATMConfigCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.2.10.1.4ctATMSignalConfigCTATM-CONFIG-MIB
1.3.6.1.4.1.52.4.1.2.10.1.4.1ctATMSignalTableCTATM-CONFIG-MIB
1.3.6.1.4.1.52.4.1.2.10.1.4.1.1ctATMSignalEntryCTATM-CONFIG-MIB
1.3.6.1.4.1.52.4.1.2.10.1.4.1.1.5ctATMSignalQsaalStatusCTATM-CONFIG-MIB