All MIBs › CTATM-CONFIG-MIB › ctATMPvcBwAllocStatus
ctATMPvcBwAllocStatus
Module: CTATM-CONFIG-MIB
OID (symbolic): CTATM-CONFIG-MIB::ctATMPvcBwAllocStatus
OID (numeric): 1.3.6.1.4.1.52.4.1.2.10.1.1.6.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The values on and off can be written to this object. Selecting on will enable bandwidth allocation mode on this interface. When this mode is enabled all LECs and PVCs currently configured on this interface will be deleted, UNI and ILMI will be disabled, and this module will reboot.
Selecing off will disable bandwidth allocation mode on this interface. When this mode is disabled all PVCs currently configured on this interface will be deleted, UNI and ILMI will revert to their former status, and this module will reboot.
If bandwidth allocation mode is not supported by this module the value notSupported will be returned by this object. This value can not be set by the network administrator.
This object is persistent.
What is ctATMPvcBwAllocStatus?
This read-write INTEGER, on or off, is highly disruptive when set to on: it enables bandwidth-allocation mode on the interface, deleting all currently configured LECs and PVCs, disabling UNI and ILMI, and rebooting the module. An admin must use this carefully, only during a planned maintenance window, since it tears down the interface's existing ATM configuration. For example, setting this to on(1) on a live interface immediately deletes every LEC and PVC configured there and forces the ATM module to reboot, which should never be done outside a maintenance window.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.1.6.1.2 snmpwalk -v2c -c public <target> CTATM-CONFIG-MIB::ctATMPvcBwAllocStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.1.6.1.2.1 snmpget -v2c -c public <target> CTATM-CONFIG-MIB::ctATMPvcBwAllocStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.10.1.1.6.1.2.1 i <value>
Start monitoring Cabletron/Enterasys ATM switch (interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATM-CONFIG-MIB::ctATMPvcBwAllocStatus OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATM switch (interface config) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.10 | ctATM | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.10.1 | ctATMConfig | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.10.1.1 | ctATMBaseConfig | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.6 | ctATMPvcBwAllocTable | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.6.1 | ctATMPvcBwAllocEntry | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.1.6.1.2 | ctATMPvcBwAllocStatus | CTATM-CONFIG-MIB |