All MIBs › CTATM-CONFIG-MIB › ctATMPhyRedundReset
ctATMPhyRedundReset
Module: CTATM-CONFIG-MIB
OID (symbolic): CTATM-CONFIG-MIB::ctATMPhyRedundReset
OID (numeric): 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If this object is set to reset, the state of redundancy on this interface will be reset to factory defaults.
When read this object will always return 1.
What is ctATMPhyRedundReset?
This read-write INTEGER, whose only defined value is reset(1) and which always reads back as 1, is a write-triggered action that resets this interface's redundancy configuration to factory defaults. An admin uses this to clear a misconfigured redundancy setup and start over cleanly. For example, setting this to reset(1) after a botched manual redundancy configuration wipes the primary-port, activation, and revert settings for that interface back to their factory defaults.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.10 snmpwalk -v2c -c public <target> CTATM-CONFIG-MIB::ctATMPhyRedundReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.10.1 snmpget -v2c -c public <target> CTATM-CONFIG-MIB::ctATMPhyRedundReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.10.1 i <value>
Start monitoring Cabletron/Enterasys ATM switch (interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATM-CONFIG-MIB::ctATMPhyRedundReset OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATM switch (interface config) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.10 | ctATM | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.10.1 | ctATMConfig | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.10.1.2 | ctATMPhysicalRedundancy | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1 | ctATMPhysicalRedundancyInterface | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1 | ctATMPhyRedundTable | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1 | ctATMPhyRedundEntry | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.10 | ctATMPhyRedundReset | CTATM-CONFIG-MIB |