All MIBs › CTATM-CONFIG-MIB › ctATMPhyRedundActivation
ctATMPhyRedundActivation
Module: CTATM-CONFIG-MIB
OID (symbolic): CTATM-CONFIG-MIB::ctATMPhyRedundActivation
OID (numeric): 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If this object is set to automatic, a backup port will automatically be activated upon failure of the active port.
If this object is set to manual, it will require the manual setting of ctATMPhyRedundActivePort to activate a port upon failure of the currently active port.
See ctATMPhyRedundActivePort for a description of the relationships between this object, ctATMPhyRedundStatus, ctATMPhyRedundActivePort, and ctATMPhyRedundPrimaryRevert.
This object is persistent.
What is ctATMPhyRedundActivation?
This read-write INTEGER, automatic or manual, determines whether a backup port is automatically activated upon failure of the active port, or whether the admin must manually set ctATMPhyRedundActivePort themselves after a failure. An admin chooses automatic for hands-off failover or manual to control cutover timing personally. For example, setting this to manual(2) means that if the active port fails, traffic stays down until the admin explicitly sets ctATMPhyRedundActivePort to the backup port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.5 snmpwalk -v2c -c public <target> CTATM-CONFIG-MIB::ctATMPhyRedundActivation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.5.1 snmpget -v2c -c public <target> CTATM-CONFIG-MIB::ctATMPhyRedundActivation.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.5.1 i <value>
Start monitoring Cabletron/Enterasys ATM switch (interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATM-CONFIG-MIB::ctATMPhyRedundActivation OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATM switch (interface config) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.10 | ctATM | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.10.1 | ctATMConfig | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.10.1.2 | ctATMPhysicalRedundancy | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1 | ctATMPhysicalRedundancyInterface | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1 | ctATMPhyRedundTable | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1 | ctATMPhyRedundEntry | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.2.1.1.1.5 | ctATMPhyRedundActivation | CTATM-CONFIG-MIB |