CTATM-CONFIG-MIB :: ctATMLecIfDef

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTATM-CONFIG-MIBctATMLecIfDef

ctATMLecIfDef

Module: CTATM-CONFIG-MIB

OID (symbolic): CTATM-CONFIG-MIB::ctATMLecIfDef

OID (numeric): 1.3.6.1.4.1.52.4.1.2.10.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is the physical interface on which _all_ LAN Emulation Clients (LECs) will be created.

It is an error to set an interface number which does not support ATM.

This object is persistent. However, during reinitialization of the device if it is found that the interface no longer supports ATM, then the first ATM interface for the device will be used as the value for this object.

What is ctATMLecIfDef?

This read-write INTEGER, ranging 1 through 512 and persistent across reinitialization with automatic fallback to the first ATM interface if the configured one no longer supports ATM, identifies the physical interface on which all LAN Emulation Clients will be created. An admin configures this to designate which physical ATM port hosts new LECs. For example, setting this to interface 4 means every LEC created afterward is instantiated on the ATM interface at ifIndex 4.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.1.2
snmpwalk -v2c -c public <target> CTATM-CONFIG-MIB::ctATMLecIfDef

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.1.2.1
snmpget -v2c -c public <target> CTATM-CONFIG-MIB::ctATMLecIfDef.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.10.1.1.2.1 i <value>

Start monitoring Cabletron/Enterasys ATM switch (interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATM-CONFIG-MIB::ctATMLecIfDef OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATM switch (interface config) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.1ctronCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.2ctDataLinkCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.2.10ctATMCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.2.10.1ctATMConfigCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.2.10.1.1ctATMBaseConfigCTATM-CONFIG-MIB
1.3.6.1.4.1.52.4.1.2.10.1.1.2ctATMLecIfDefCTATM-CONFIG-MIB