All MIBs › CTATM-CONFIG-MIB › ctATMIlmiStatus
ctATMIlmiStatus
Module: CTATM-CONFIG-MIB
OID (symbolic): CTATM-CONFIG-MIB::ctATMIlmiStatus
OID (numeric): 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If this object is set to enableAutoConfigure, then ILMI on this interface will attempt to automatically configure the version of UNI to use on this interface. After the auto configure process has completed, the version of UNI this interface is running can be obtained by reading the ctATMSignalType object.
If this object is set to enable, the ILMI for this interface is enabled.
If enabled (with or without auto-configure), ILMI on this interface will attempt address registration.
If this object is set to disable, auto-configure and address registration are both disabled. The signalling to use on this interface is then dictated by the value of ctATMSignalType. If disabled, the ILMI channel (0/16) will not be created.
It is an error to set a value other than disable to this object when ctATMDefApplication is set to lane04.
It is an error to write to ctATMSignalType when this object is set to enableAutoConfigure.
This object is persistent, i.e, it will retain its value between powerdowns.
What is ctATMIlmiStatus?
This read-write INTEGER, enableAutoConfigure, enable, or disable, controls whether ILMI on this interface attempts to auto-negotiate the UNI signaling version (readable afterward via ctATMSignalType), is simply enabled without auto-configuring, or is turned off entirely. An admin sets this to decide whether the device relies on ILMI to determine its UNI version automatically versus configuring it manually. For example, setting this to enableAutoConfigure(1) on a new link to an unfamiliar switch lets the device auto-detect the correct UNI version rather than requiring the admin to guess and set ctATMSignalType by hand.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.2 snmpwalk -v2c -c public <target> CTATM-CONFIG-MIB::ctATMIlmiStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.2.1 snmpget -v2c -c public <target> CTATM-CONFIG-MIB::ctATMIlmiStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.2.1 i <value>
Start monitoring Cabletron/Enterasys ATM switch (interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATM-CONFIG-MIB::ctATMIlmiStatus OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATM switch (interface config) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.10 | ctATM | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.10.1 | ctATMConfig | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.10.1.3 | ctATMIlmi | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.3.1 | ctATMIlmiTable | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1 | ctATMIlmiEntry | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.2 | ctATMIlmiStatus | CTATM-CONFIG-MIB |