All MIBs › CTATM-CONFIG-MIB › ctATMIlmiAtmAddress
ctATMIlmiAtmAddress
Module: CTATM-CONFIG-MIB
OID (symbolic): CTATM-CONFIG-MIB::ctATMIlmiAtmAddress
OID (numeric): 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.3
Node type: OBJECT-TYPE
Type: AtmAddress
Access: read-write
Description: This object is used as the ATM address of this interface if ILMI on this interface is disabled i.e, the value of IlmiStatus is set to disable.
If ILMI address registration is successful (ctATMIlmiState is up) then a read on this object will return the ATM Address in use at this interface.
It is an error to write to this object when the value of ctATMIlmiStatus is other than disable.
This object is persistent. However, enabling ILMI after writing to this object will cause ILMI to ignore the persistent value.
What is ctATMIlmiAtmAddress?
This read-write AtmAddress is used as this interface's ATM address when ILMI is disabled, and it becomes an error to write to it while ILMI is anything other than disable; once ILMI address registration succeeds, reading this object returns the actually-in-use address. An admin sets this to manually assign an ATM address only when ILMI-based auto-registration has been turned off. For example, attempting to set this object while ctATMIlmiStatus is enable(2) fails, since manual address assignment is permitted only when ILMI is disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.3 snmpwalk -v2c -c public <target> CTATM-CONFIG-MIB::ctATMIlmiAtmAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.3.1 snmpget -v2c -c public <target> CTATM-CONFIG-MIB::ctATMIlmiAtmAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.3.1 s <value>
Start monitoring Cabletron/Enterasys ATM switch (interface config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATM-CONFIG-MIB::ctATMIlmiAtmAddress OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATM switch (interface config) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.10 | ctATM | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.10.1 | ctATMConfig | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.10.1.3 | ctATMIlmi | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.3.1 | ctATMIlmiTable | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1 | ctATMIlmiEntry | CTATM-CONFIG-MIB |
| 1.3.6.1.4.1.52.4.1.2.10.1.3.1.1.3 | ctATMIlmiAtmAddress | CTATM-CONFIG-MIB |