All MIBs › CT-DAWANCONN-MIB › daWanConnectionConnectControl
daWanConnectionConnectControl
Module: CT-DAWANCONN-MIB
OID (symbolic): CT-DAWANCONN-MIB::daWanConnectionConnectControl
OID (numeric): 1.3.6.1.4.1.52.4497.17.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls the desired state of the wan Connection. Setting this object to connect(1) will initiate the set of actions to bring the wan Connection to the active state. Only set the object to connect(1) when the current value of daWanConnectionState is inactive. Setting this object to disconnect(2) will initiate the set of actions to bring the wan Connection to the inactive state. Only set this object to disconnect(2) when the daWanConnectionState is active. After setting the Connection to connect(1) or disconnect(2), refer to daWanConnectionState to determine the state of the wan Connection. Queries to daWanConnectionConnectControl return unknown results.
What is daWanConnectionConnectControl?
This read-write connect/disconnect/unknown INTEGER lets an admin directly command an individual connection into or out of the active state, with connect(1) valid only from the inactive state. An admin uses this finer-grained control to bring up or tear down one specific call leg without affecting the peer device's other connections. For example, an admin wanting to add one more bonded channel to an existing peer link could set this object to connect(1) on a specific inactive connection row for that peer.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4497.17.2.1.4 snmpwalk -v2c -c public <target> CT-DAWANCONN-MIB::daWanConnectionConnectControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4497.17.2.1.4.1 snmpget -v2c -c public <target> CT-DAWANCONN-MIB::daWanConnectionConnectControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4497.17.2.1.4.1 i <value>
Start monitoring Cabletron/Enterasys direct-attached WAN router (connection state) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CT-DAWANCONN-MIB::daWanConnectionConnectControl OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys direct-attached WAN router (connection state) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4497 | ctSSA | CT-DARADIUS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4497.17 | daWanConnection | CT-DAWANCONN-MIB |
| 1.3.6.1.4.1.52.4497.17.2 | daWanConnectionTable | CT-DAWANCONN-MIB |
| 1.3.6.1.4.1.52.4497.17.2.1 | daWanConnectionEntry | CT-DAWANCONN-MIB |
| 1.3.6.1.4.1.52.4497.17.2.1.4 | daWanConnectionConnectControl | CT-DAWANCONN-MIB |