All MIBs › CT-DAWAN-MIB › ctDAWanDeviceConnectControl
ctDAWanDeviceConnectControl
Module: CT-DAWAN-MIB
OID (symbolic): CT-DAWAN-MIB::ctDAWanDeviceConnectControl
OID (numeric): 1.3.6.1.4.1.52.4497.16.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls the desired state of the wan device. Setting this object to connect(1) will initiate the set of actions to bring the wan device to the active state. Only set the object to connect(1) when the current value of ctDAWanDeviceState is inactive. Setting this object to disconnect(2) will initiate the set of actions to bring the wan device to the inactive state. Only set this object to disconnect(2) when the ctDAWanDeviceState is active. After setting the device to connect(1) or disconnect(2), refer to ctDAWanDeviceState to determine the state of the wan device. Queries to ctDAWanDeviceConnectControl return unknown results.
What is ctDAWanDeviceConnectControl?
This read-write connect/disconnect/unknown INTEGER lets an admin explicitly command this WAN device into the active or inactive state; connect(1) should only be set when the device is currently inactive, and disconnect(2) only when it needs to be brought down. An admin uses this to manually bring up or tear down a WAN peer link outside of automatic dial-on-demand behavior. For example, an admin troubleshooting a branch office link could set this object to connect(1) to force a fresh connection attempt to that peer device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4497.16.2.1.6 snmpwalk -v2c -c public <target> CT-DAWAN-MIB::ctDAWanDeviceConnectControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4497.16.2.1.6.1 snmpget -v2c -c public <target> CT-DAWAN-MIB::ctDAWanDeviceConnectControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4497.16.2.1.6.1 i <value>
Start monitoring Cabletron/Enterasys WAN routers and multiservice switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CT-DAWAN-MIB::ctDAWanDeviceConnectControl OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys WAN routers and multiservice switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4497 | ctSSA | CT-DARADIUS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4497.16 | ctDAWanDevices | CT-DAWAN-MIB |
| 1.3.6.1.4.1.52.4497.16.2 | ctDAWanDevicesTable | CT-DAWAN-MIB |
| 1.3.6.1.4.1.52.4497.16.2.1 | ctDAWanDeviceEntry | CT-DAWAN-MIB |
| 1.3.6.1.4.1.52.4497.16.2.1.6 | ctDAWanDeviceConnectControl | CT-DAWAN-MIB |