All MIBs › CT-BROADCAST-MIB › ctBroadcastPeakBroadcastClear
ctBroadcastPeakBroadcastClear
Module: CT-BROADCAST-MIB
OID (symbolic): CT-BROADCAST-MIB::ctBroadcastPeakBroadcastClear
OID (numeric): 1.3.6.1.4.1.52.4.1.2.13.1.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to clear the values found in peakBroadcastRate and peakBroadcastRateTime.
When set with a value of clear(1) the values will be cleared. When read, a value a value of noClear(2) will be returned. A set of a value of noClear(2) will have no effect.
What is ctBroadcastPeakBroadcastClear?
This control resets the recorded peak broadcast rate and its timestamp back to a baseline when written with clear; reading the object always returns noClear, and writing noClear has no effect. Admins use this after investigating and resolving the cause of a recorded peak, so future peaks can be tracked cleanly without the old high-water mark lingering. For example, after addressing the device that caused a broadcast spike, an admin would set ctBroadcastPeakBroadcastClear to clear to reset the peak statistics for that interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.13.1.1.1.6 snmpwalk -v2c -c public <target> CT-BROADCAST-MIB::ctBroadcastPeakBroadcastClear
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.13.1.1.1.6.1 snmpget -v2c -c public <target> CT-BROADCAST-MIB::ctBroadcastPeakBroadcastClear.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.13.1.1.1.6.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ctBroadcastPeakBroadcastClear.1
Start monitoring Cabletron/Enterasys enterprise LAN switch (broadcast storm control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CT-BROADCAST-MIB::ctBroadcastPeakBroadcastClear OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys enterprise LAN switch (broadcast storm control) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.13 | ctBroadcast | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.13.1 | ctBroadcastCtl | CT-BROADCAST-MIB |
| 1.3.6.1.4.1.52.4.1.2.13.1.1 | ctBroadcastCtlTable | CT-BROADCAST-MIB |
| 1.3.6.1.4.1.52.4.1.2.13.1.1.1 | ctBroadcastCtlEntry | CT-BROADCAST-MIB |
| 1.3.6.1.4.1.52.4.1.2.13.1.1.1.6 | ctBroadcastPeakBroadcastClear | CT-BROADCAST-MIB |