CPS-MIB :: upsAdvanceSleepAfterDelay

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCPS-MIBupsAdvanceSleepAfterDelay

upsAdvanceSleepAfterDelay

Module: CPS-MIB

OID (symbolic): CPS-MIB::upsAdvanceSleepAfterDelay

OID (numeric): 1.3.6.1.4.1.3808.1.1.1.6.2.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: UPS will enter sleep mode after indicated number of seconds, or less if the UPS batteries become depleted. Setting this object to 0 will cause the shutdown to occur immediately. Setting this object to -1 will abort the countdown.

What is upsAdvanceSleepAfterDelay?

This read-write integer, ranging from -1 to 600 seconds, schedules the UPS to enter sleep mode after the indicated number of seconds, or sooner if the batteries become depleted; setting it to 0 shuts down immediately, and setting it to -1 aborts an in-progress countdown. It gives an admin a single numeric write to both start and cancel a delayed shutdown countdown, rather than requiring separate commands. For example, an admin sets this to 120 to start a two-minute shutdown countdown, then later writes -1 to abort it if the issue that prompted the shutdown gets resolved first.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.1.6.2.7
snmpwalk -v2c -c public <target> CPS-MIB::upsAdvanceSleepAfterDelay

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.1.6.2.7.1
snmpget -v2c -c public <target> CPS-MIB::upsAdvanceSleepAfterDelay.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3808.1.1.1.6.2.7.1 i <value>

Start monitoring UPS product line (vendor unclear, enterprise OID 3808) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPS-MIB::upsAdvanceSleepAfterDelay OID value, configure state conditions and alerts, and monitor any UPS product line (vendor unclear, enterprise OID 3808) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3808cpsCPS-MIB
1.3.6.1.4.1.3808.1productsCPS-MIB
1.3.6.1.4.1.3808.1.1hardwareCPS-MIB
1.3.6.1.4.1.3808.1.1.1upsCPS-MIB
1.3.6.1.4.1.3808.1.1.1.6upsControlCPS-MIB
1.3.6.1.4.1.3808.1.1.1.6.2upsAdvanceControlCPS-MIB
1.3.6.1.4.1.3808.1.1.1.6.2.7upsAdvanceSleepAfterDelayCPS-MIB