CPS-MIB :: upsAdvanceConfigHighTransferVolt

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCPS-MIBupsAdvanceConfigHighTransferVolt

upsAdvanceConfigHighTransferVolt

Module: CPS-MIB

OID (symbolic): CPS-MIB::upsAdvanceConfigHighTransferVolt

OID (numeric): 1.3.6.1.4.1.3808.1.1.1.5.2.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Adjust the high transfer vloltage in VAC. The high transfer vloltage will become the UPS default value subtracts this value. The allowed values depend on the output: 100-127 volt system allow settings of 0-15. 208-240 volt system allow settings of 0-30. If the adjustable value is over the allowed values, it will not be accepted.

What is upsAdvanceConfigHighTransferVolt?

This read-write integer adjusts how far the high transfer voltage is subtracted from the UPS's default, with allowed settings of 0-15 for 100-127V systems and 0-30 for 208-240V systems. An admin uses it to fine-tune how far above nominal incoming voltage must rise before the UPS transfers to battery due to overvoltage. For example, on a 120V system an admin sets this to 10, tightening the high-transfer trigger point below the factory default.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.1.5.2.2
snmpwalk -v2c -c public <target> CPS-MIB::upsAdvanceConfigHighTransferVolt

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.1.5.2.2.1
snmpget -v2c -c public <target> CPS-MIB::upsAdvanceConfigHighTransferVolt.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3808.1.1.1.5.2.2.1 i <value>

Start monitoring UPS product line (vendor unclear, enterprise OID 3808) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPS-MIB::upsAdvanceConfigHighTransferVolt OID value, configure state conditions and alerts, and monitor any UPS product line (vendor unclear, enterprise OID 3808) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3808cpsCPS-MIB
1.3.6.1.4.1.3808.1productsCPS-MIB
1.3.6.1.4.1.3808.1.1hardwareCPS-MIB
1.3.6.1.4.1.3808.1.1.1upsCPS-MIB
1.3.6.1.4.1.3808.1.1.1.5upsConfigCPS-MIB
1.3.6.1.4.1.3808.1.1.1.5.2upsAdvanceConfigCPS-MIB
1.3.6.1.4.1.3808.1.1.1.5.2.2upsAdvanceConfigHighTransferVoltCPS-MIB