All MIBs › CPS-MIB › ePDULoadBankConfigLowLoadThreshold
ePDULoadBankConfigLowLoadThreshold
Module: CPS-MIB
OID (symbolic): CPS-MIB::ePDULoadBankConfigLowLoadThreshold
OID (numeric): 1.3.6.1.4.1.3808.1.1.3.2.4.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A threshold that indicates the power consumption of the load is nearing a low consumption condition. It is represented in Amps. A warning will be issued when the load is less than the threshold value.
A threshold value of 0 Amps effectively disables this warning.
Maximum value must be less than the value returned by the ePDULoadBankConfigNearOverloadThreshold OID.
What is ePDULoadBankConfigLowLoadThreshold?
This read-write integer sets the low-load warning threshold, in amps, for one bank of outlets; a warning fires when the bank's load drops below this value, with 0 disabling the warning. Admins use it to catch a bank that has unexpectedly gone idle, such as when equipment plugged into that bank has failed or been unplugged. Setting this to 1 amp on a bank normally carrying several amps would trigger a warning the moment that bank's load falls to near zero.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.3.2.4.1.1.2 snmpwalk -v2c -c public <target> CPS-MIB::ePDULoadBankConfigLowLoadThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.3.2.4.1.1.2.1 snmpget -v2c -c public <target> CPS-MIB::ePDULoadBankConfigLowLoadThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3808.1.1.3.2.4.1.1.2.1 i <value>
Start monitoring UPS product line (vendor unclear, enterprise OID 3808) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPS-MIB::ePDULoadBankConfigLowLoadThreshold OID value, configure state conditions and alerts, and monitor any UPS product line (vendor unclear, enterprise OID 3808) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3808 | cps | CPS-MIB |
| 1.3.6.1.4.1.3808.1 | products | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1 | hardware | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.3 | ePDU | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.3.2 | ePDULoad | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.3.2.4 | ePDULoadBankConfig | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.3.2.4.1 | ePDULoadBankConfigTable | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.3.2.4.1.1 | ePDULoadBankConfigEntry | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.3.2.4.1.1.2 | ePDULoadBankConfigLowLoadThreshold | CPS-MIB |