All MIBs › CPS-MIB › ePDU2OutletSwitchedConfigRebootDuration
ePDU2OutletSwitchedConfigRebootDuration
Module: CPS-MIB
OID (symbolic): CPS-MIB::ePDU2OutletSwitchedConfigRebootDuration
OID (numeric): 1.3.6.1.4.1.3808.1.1.6.6.1.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: During a reboot sequence, power is turned off and then back on. This OID defines the amount of time to wait, in seconds, after turning the power off, at the start of the sequence, before turning power back on, at the end of the reboot sequence.
Allowed range is any value between 5 and 60 seconds (1 minute).
What is ePDU2OutletSwitchedConfigRebootDuration?
This read-write integer, ranging from 5 to 60 seconds, sets how long a given switched outlet stays off during a reboot sequence before power is restored. An admin tunes it long enough for the connected device's power supply to fully discharge so the reboot is a genuine power cycle. For example, setting this to 10 seconds on an outlet feeding a small network appliance ensures a full power cycle without leaving the device off longer than necessary.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.6.6.1.2.1.7 snmpwalk -v2c -c public <target> CPS-MIB::ePDU2OutletSwitchedConfigRebootDuration
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.6.6.1.2.1.7.1 snmpget -v2c -c public <target> CPS-MIB::ePDU2OutletSwitchedConfigRebootDuration.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3808.1.1.6.6.1.2.1.7.1 i <value>
Start monitoring UPS product line (vendor unclear, enterprise OID 3808) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPS-MIB::ePDU2OutletSwitchedConfigRebootDuration OID value, configure state conditions and alerts, and monitor any UPS product line (vendor unclear, enterprise OID 3808) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3808 | cps | CPS-MIB |
| 1.3.6.1.4.1.3808.1 | products | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1 | hardware | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.6 | ePDU2 | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.6.6 | ePDU2Outlet | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.6.6.1 | ePDU2OutletSwitched | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.6.6.1.2 | ePDU2OutletSwitchedConfigTable | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.6.6.1.2.1 | ePDU2OutletSwitchedConfigEntry | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.6.6.1.2.1.7 | ePDU2OutletSwitchedConfigRebootDuration | CPS-MIB |