All MIBs › CPS-MIB › ePDU2DeviceConfigPeakLoadReset
ePDU2DeviceConfigPeakLoadReset
Module: CPS-MIB
OID (symbolic): CPS-MIB::ePDU2DeviceConfigPeakLoadReset
OID (numeric): 1.3.6.1.4.1.3808.1.1.6.3.2.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this OID to resetAll (2) will cause the existing peak current value of Rack PDU and its outlets to be replaced by the current load current value. Setting this OID to resetDevice (3) to reset the Rack PDU only. Setting this OID to resetOutlets (4) to reset the PDU outlets only.
Getting this OID will do nothing and return the noOperation(1) value.
What is ePDU2DeviceConfigPeakLoadReset?
This read-write enumeration resets recorded peak current values, choosing noOperation(1), resetAll(2), resetDevice(3), or resetOutlets(4); getting this OID always just returns noOperation(1). An admin sets it after resolving a temporary spike so the peak-load history reflects normal operation going forward rather than a one-off event. For example, setting this to resetDevice(3) after a short-lived spike caused by a one-time diagnostic test clears that spike from the PDU's recorded peak, without touching the individual outlets' peak records.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.6.3.2.1.11 snmpwalk -v2c -c public <target> CPS-MIB::ePDU2DeviceConfigPeakLoadReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.6.3.2.1.11.1 snmpget -v2c -c public <target> CPS-MIB::ePDU2DeviceConfigPeakLoadReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3808.1.1.6.3.2.1.11.1 i <value>
Start monitoring UPS product line (vendor unclear, enterprise OID 3808) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPS-MIB::ePDU2DeviceConfigPeakLoadReset OID value, configure state conditions and alerts, and monitor any UPS product line (vendor unclear, enterprise OID 3808) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3808 | cps | CPS-MIB |
| 1.3.6.1.4.1.3808.1 | products | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1 | hardware | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.6 | ePDU2 | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.6.3 | ePDU2Device | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.6.3.2 | ePDU2DeviceConfigTable | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.6.3.2.1 | ePDU2DeviceConfigEntry | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.6.3.2.1.11 | ePDU2DeviceConfigPeakLoadReset | CPS-MIB |