All MIBs › CPS-MIB › bmConfigHighVoltAlarmThreshold10mV
bmConfigHighVoltAlarmThreshold10mV
Module: CPS-MIB
OID (symbolic): CPS-MIB::bmConfigHighVoltAlarmThreshold10mV
OID (numeric): 1.3.6.1.4.1.3808.1.1.7.3.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Battery high voltage alarm threshold setting, unit in 10 mV (0.01 volt).
What is bmConfigHighVoltAlarmThreshold10mV?
This read-write integer sets the same high-voltage alarm concept as bmConfigHighVoltAlarmThreshold but in finer 10 mV units for more precise configuration. It lets an admin fine-tune the overcharge alarm point beyond the tenth-of-a-volt granularity offered elsewhere. For example, setting this to 1465 configures a 14.65 volt high-voltage alarm point, more precise than the 0.1 volt version could express.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.7.3.16 snmpwalk -v2c -c public <target> CPS-MIB::bmConfigHighVoltAlarmThreshold10mV
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.7.3.16.1 snmpget -v2c -c public <target> CPS-MIB::bmConfigHighVoltAlarmThreshold10mV.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3808.1.1.7.3.16.1 i <value>
Start monitoring UPS product line (vendor unclear, enterprise OID 3808) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPS-MIB::bmConfigHighVoltAlarmThreshold10mV OID value, configure state conditions and alerts, and monitor any UPS product line (vendor unclear, enterprise OID 3808) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3808 | cps | CPS-MIB |
| 1.3.6.1.4.1.3808.1 | products | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1 | hardware | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.7 | battmgr | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.7.3 | bmConfig | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.7.3.16 | bmConfigHighVoltAlarmThreshold10mV | CPS-MIB |