CPS-MIB :: atsOutletCfgRebootDuration

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCPS-MIBatsOutletCfgRebootDuration

atsOutletCfgRebootDuration

Module: CPS-MIB

OID (symbolic): CPS-MIB::atsOutletCfgRebootDuration

OID (numeric): 1.3.6.1.4.1.3808.1.1.5.6.7.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: During a reboot sequence, power is turned off and then back on. This OID defines the amount of time to wait, in seconds, after turning the power off, at the start of the sequence, before turning power back on, at the end of the reboot sequence.

Allowed range is any value between 5 and 60 seconds (1 minute).

What is atsOutletCfgRebootDuration?

This read-write integer, ranging from 5 to 60 seconds, sets how long a given ATS outlet stays off during a reboot sequence before power is restored. An admin tunes it long enough for the connected device's power supply to fully discharge so the reboot is a genuine power cycle rather than a brief blip the device might ride through. For example, setting this to 15 seconds on an outlet feeding a network device with a large power supply ensures the device is truly de-energized before it's turned back on.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.5.6.7.1.5
snmpwalk -v2c -c public <target> CPS-MIB::atsOutletCfgRebootDuration

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.5.6.7.1.5.1
snmpget -v2c -c public <target> CPS-MIB::atsOutletCfgRebootDuration.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3808.1.1.5.6.7.1.5.1 i <value>

Start monitoring UPS product line (vendor unclear, enterprise OID 3808) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPS-MIB::atsOutletCfgRebootDuration OID value, configure state conditions and alerts, and monitor any UPS product line (vendor unclear, enterprise OID 3808) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3808cpsCPS-MIB
1.3.6.1.4.1.3808.1productsCPS-MIB
1.3.6.1.4.1.3808.1.1hardwareCPS-MIB
1.3.6.1.4.1.3808.1.1.5atsCPS-MIB
1.3.6.1.4.1.3808.1.1.5.6atsOutletCPS-MIB
1.3.6.1.4.1.3808.1.1.5.6.7atsOutletCfgTableCPS-MIB
1.3.6.1.4.1.3808.1.1.5.6.7.1atsOutletCfgEntryCPS-MIB
1.3.6.1.4.1.3808.1.1.5.6.7.1.5atsOutletCfgRebootDurationCPS-MIB