All MIBs › CPS-MIB › atsLoadCfgPhaseOutletRestriction
atsLoadCfgPhaseOutletRestriction
Module: CPS-MIB
OID (symbolic): CPS-MIB::atsLoadCfgPhaseOutletRestriction
OID (numeric): 1.3.6.1.4.1.3808.1.1.5.5.3.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This OID controls the behavior of a ATS phase when an overload condition is possible and additional outlets are requested to be turned on.
Setting this OID to alwaysAllowTurnON (1) will always allow the outlets on the corresponding phase to turn on.
Setting this OID to restrictOnNearOverload (2) will not allow outlets on the corresponding phase to turn on if the ePDULoadConfigNearOverloadThreshold OID is exceeded.
Setting this OID to restrictOnOverload (3) will not allow outlets on the corresponding phase to turn on if the ePDULoadConfigOverloadThreshold OID is exceeded.
What is atsLoadCfgPhaseOutletRestriction?
This read-write enumeration controls whether the ATS allows additional outlets on a given phase to turn on when that phase is near or at an overload condition, choosing among alwaysAllowTurnON(1), restrictOnNearOverload(2), and restrictOnOverload(3). An admin sets it to protect a circuit from being pushed past its threshold by outlets turning on unattended, such as after a scheduled power-on. For example, setting this to restrictOnNearOverload(2) on a heavily loaded phase blocks new outlets from energizing once that phase's near-overload threshold is exceeded.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.5.5.3.2.1.6 snmpwalk -v2c -c public <target> CPS-MIB::atsLoadCfgPhaseOutletRestriction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.5.5.3.2.1.6.1 snmpget -v2c -c public <target> CPS-MIB::atsLoadCfgPhaseOutletRestriction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3808.1.1.5.5.3.2.1.6.1 i <value>
Start monitoring UPS product line (vendor unclear, enterprise OID 3808) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPS-MIB::atsLoadCfgPhaseOutletRestriction OID value, configure state conditions and alerts, and monitor any UPS product line (vendor unclear, enterprise OID 3808) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3808 | cps | CPS-MIB |
| 1.3.6.1.4.1.3808.1 | products | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1 | hardware | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.5 | ats | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.5.5 | atsLoad | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.5.5.3 | atsLoadConfig | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.5.5.3.2 | atsLoadCfgPhaseTable | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.5.5.3.2.1 | atsLoadCfgPhaseEntry | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.5.5.3.2.1.6 | atsLoadCfgPhaseOutletRestriction | CPS-MIB |