All MIBs › CPS-MIB › atsLoadCfgBankOutletRestriction
atsLoadCfgBankOutletRestriction
Module: CPS-MIB
OID (symbolic): CPS-MIB::atsLoadCfgBankOutletRestriction
OID (numeric): 1.3.6.1.4.1.3808.1.1.5.5.3.4.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This OID controls the behavior of a ATS phase when an overload condition is possible and additional outlets are requested to be turned on.
Setting this OID to alwaysAllowTurnON (1) will always allow the outlets on the corresponding phase to turn on.
Setting this OID to restrictOnNearOverload (2) will not allow outlets on the corresponding phase to turn on if the ePDULoadConfigNearOverloadThreshold OID is exceeded.
Setting this OID to restrictOnOverload (3) will not allow outlets on the corresponding phase to turn on if the ePDULoadConfigOverloadThreshold OID is exceeded.
What is atsLoadCfgBankOutletRestriction?
This read-write enumeration controls whether the ATS allows additional outlets on a given bank to turn on when that bank is near or at an overload condition, choosing among alwaysAllowTurnON(1), restrictOnNearOverload(2), and restrictOnOverload(3). An admin sets it so outlets scheduled to power on can't push an already-strained bank past a safe limit. For example, setting this to restrictOnOverload(3) on a bank shared by several servers prevents any additional outlet on that bank from energizing once it is already overloaded.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.5.5.3.4.1.5 snmpwalk -v2c -c public <target> CPS-MIB::atsLoadCfgBankOutletRestriction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3808.1.1.5.5.3.4.1.5.1 snmpget -v2c -c public <target> CPS-MIB::atsLoadCfgBankOutletRestriction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3808.1.1.5.5.3.4.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> atsLoadCfgBankOutletRestriction.1
Start monitoring UPS product line (vendor unclear, enterprise OID 3808) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPS-MIB::atsLoadCfgBankOutletRestriction OID value, configure state conditions and alerts, and monitor any UPS product line (vendor unclear, enterprise OID 3808) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3808 | cps | CPS-MIB |
| 1.3.6.1.4.1.3808.1 | products | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1 | hardware | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.5 | ats | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.5.5 | atsLoad | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.5.5.3 | atsLoadConfig | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.5.5.3.4 | atsLoadCfgBankTable | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.5.5.3.4.1 | atsLoadCfgBankEntry | CPS-MIB |
| 1.3.6.1.4.1.3808.1.1.5.5.3.4.1.5 | atsLoadCfgBankOutletRestriction | CPS-MIB |