All MIBs › CPQWCRM-MIB › waterCoolUnitOutputType
waterCoolUnitOutputType
Module: CPQWCRM-MIB
OID (symbolic): CPQWCRM-MIB::waterCoolUnitOutputType
OID (numeric): 1.3.6.1.4.1.232.167.2.4.6.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Type of output which is connected to water cool unit to output[waterCoolUnitOutputIndex] 1: no output connected 2: output failure 3: value overflow 4: water valve setpoint 5: water valve hysteresis 6: command for manual control 7: Flow Meter Model, 0=SIKA, 1=Chemline 8: minimum fan speed 9: min delta T, used for fan control 10: max delta T, used for fan control 11: specific heat capacity 12: setpoint heatload warning 13: setpoint Water Flow Loss Emergency Door Opening 14: setpoint High Temperature Emergency Door Opening 15: setpoint Condensation Pump Cycles (Warning) 16: setpoint Condensation Pump Running Time (Warning) 17: command for door opening, 0=lock door, 1=unlock door 18: KP parameter for PID controller 19: KI parameter for PID controller 20: KD parameter for PID controller 21: sampling time PID controller
What is waterCoolUnitOutputType?
This read-only enumerated value reports what specific cooling function a given output index controls on the water-cooling unit, including setpoint, hysteresis, manual command, flow-meter model, and other listed functions. It tells an admin exactly what kind of control a particular output index represents before attempting to configure it. For example, a type value describing flow-meter model tells the admin that output actually selects between SIKA and Chemline flow meters, not a simple on/off relay.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.167.2.4.6.2.1.2 snmpwalk -v2c -c public <target> CPQWCRM-MIB::waterCoolUnitOutputType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.167.2.4.6.2.1.2.1 snmpget -v2c -c public <target> CPQWCRM-MIB::waterCoolUnitOutputType.1
Start monitoring Legacy Compaq (HP) rack/console environmental-management hardware with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQWCRM-MIB::waterCoolUnitOutputType OID value, configure state conditions and alerts, and monitor any Legacy Compaq (HP) rack/console environmental-management hardware from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.167 | cpqWcrm | CPQWCRM-MIB |
| 1.3.6.1.4.1.232.167.2 | cpqWcrmStatus | CPQWCRM-MIB |
| 1.3.6.1.4.1.232.167.2.4 | cpqWcrmStatusSensorWaterCoolUnit | CPQWCRM-MIB |
| 1.3.6.1.4.1.232.167.2.4.6 | cpqWcrmStatusWaterCoolUnitOutputs | CPQWCRM-MIB |
| 1.3.6.1.4.1.232.167.2.4.6.2 | cpqWcrmWaterCoolUnitOutputTable | CPQWCRM-MIB |
| 1.3.6.1.4.1.232.167.2.4.6.2.1 | cpqWcrmWaterCoolUnitOutputEntry | CPQWCRM-MIB |
| 1.3.6.1.4.1.232.167.2.4.6.2.1.2 | waterCoolUnitOutputType | CPQWCRM-MIB |