All MIBs › CPQWCRM-MIB › cpqWcrmWaterCoolUnitStatus
cpqWcrmWaterCoolUnitStatus
Module: CPQWCRM-MIB
OID (symbolic): CPQWCRM-MIB::cpqWcrmWaterCoolUnitStatus
OID (numeric): 1.3.6.1.4.1.232.167.2.4.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: General Status sensor unit connected to port 2 (1) OK (2) error (3) configuration of sensor unit has changed, confirmation required (4) reset from sensor unit to confirm configuration changes (5) timeout of sensor unit, confirmation required (6) sensor unit detected, needs to be confirmed (8) supply voltage is too low
What is cpqWcrmWaterCoolUnitStatus?
This read-only enumerated value reports the general status of the sensor unit connected to port 2, covering ok, error, configuration changed, reset, timeout, detected, or not-available conditions. It mirrors the internal unit's status field but for the water-cooling unit, flagging when it needs operator confirmation after a detected change or a communication timeout. For example, a value of 5 (timeout) means the Environmental Controller lost communication with the port-2 water-cooling unit and an operator must confirm before it's unloaded from monitoring.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.167.2.4.4 snmpwalk -v2c -c public <target> CPQWCRM-MIB::cpqWcrmWaterCoolUnitStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.167.2.4.4.1 snmpget -v2c -c public <target> CPQWCRM-MIB::cpqWcrmWaterCoolUnitStatus.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cpqWcrmWaterCoolUnitStatus.1
Start monitoring Legacy Compaq (HP) rack/console environmental-management hardware with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQWCRM-MIB::cpqWcrmWaterCoolUnitStatus OID value, configure state conditions and alerts, and monitor any Legacy Compaq (HP) rack/console environmental-management hardware from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.167 | cpqWcrm | CPQWCRM-MIB |
| 1.3.6.1.4.1.232.167.2 | cpqWcrmStatus | CPQWCRM-MIB |
| 1.3.6.1.4.1.232.167.2.4 | cpqWcrmStatusSensorWaterCoolUnit | CPQWCRM-MIB |
| 1.3.6.1.4.1.232.167.2.4.4 | cpqWcrmWaterCoolUnitStatus | CPQWCRM-MIB |