All MIBs › CPQPOWER-MIB › upsLoadShedSecsWithRestart
upsLoadShedSecsWithRestart
Module: CPQPOWER-MIB
OID (symbolic): CPQPOWER-MIB::upsLoadShedSecsWithRestart
OID (numeric): 1.3.6.1.4.1.232.165.3.8.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this value will cause the UPS output to turn off after the set number of seconds, then restart (after a UPS-defined 'down time') when the utility is again available. Unlike UpsControlOutputOffDelay, which might or might not, this object always maps to the XCP 0x8A Load Dump & Restart command, so the desired shutdown and restart behavior is guaranteed to happen. Once set, this command cannot be aborted. This is the preferred Control object to use when performing an On Battery OS Shutdown.
What is upsLoadShedSecsWithRestart?
Setting this value schedules the UPS output to turn off after the given number of seconds and then automatically restart once utility power returns, guaranteed via the underlying XCP Load Dump & Restart command and, once set, unable to be aborted. It differs from upsControlOutputOffDelay in that the shutdown-and-restart sequence is guaranteed rather than best-effort. For example, an admin performing a hard reset of stuck equipment might use upsLoadShedSecsWithRestart to force a full power cycle of everything plugged into the UPS.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.165.3.8.6 snmpwalk -v2c -c public <target> CPQPOWER-MIB::upsLoadShedSecsWithRestart
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.165.3.8.6.1 snmpget -v2c -c public <target> CPQPOWER-MIB::upsLoadShedSecsWithRestart.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.232.165.3.8.6.1 i <value>
Start monitoring Compaq/HP-managed UPS/PDU power infrastructure with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQPOWER-MIB::upsLoadShedSecsWithRestart OID value, configure state conditions and alerts, and monitor any Compaq/HP-managed UPS/PDU power infrastructure from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.165 | cpqPower | CPQPOWER-MIB |
| 1.3.6.1.4.1.232.165.3 | ups | CPQPOWER-MIB |
| 1.3.6.1.4.1.232.165.3.8 | upsControl | CPQPOWER-MIB |
| 1.3.6.1.4.1.232.165.3.8.6 | upsLoadShedSecsWithRestart | CPQPOWER-MIB |