CPQPOWER-MIB :: upsBypassVoltage

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCPQPOWER-MIBupsBypassVoltage

upsBypassVoltage

Module: CPQPOWER-MIB

OID (symbolic): CPQPOWER-MIB::upsBypassVoltage

OID (numeric): 1.3.6.1.4.1.232.165.3.5.3.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The measured UPS bypass voltage in volts.

What is upsBypassVoltage?

This is the measured voltage on the UPS's bypass power line, in volts. Administrators check it to confirm the bypass source is within acceptable range before relying on it as backup during maintenance or an internal UPS fault. For example, if upsBypassVoltage reads far below the nominal 208V, the UPS may refuse to transfer the critical load to bypass even if commanded to do so.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.165.3.5.3.1.2
snmpwalk -v2c -c public <target> CPQPOWER-MIB::upsBypassVoltage

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.232.165.3.5.3.1.2.1
snmpget -v2c -c public <target> CPQPOWER-MIB::upsBypassVoltage.1

Start monitoring Compaq/HP-managed UPS/PDU power infrastructure with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQPOWER-MIB::upsBypassVoltage OID value, configure state conditions and alerts, and monitor any Compaq/HP-managed UPS/PDU power infrastructure from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.232compaqCOMPAQ-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.232.165cpqPowerCPQPOWER-MIB
1.3.6.1.4.1.232.165.3upsCPQPOWER-MIB
1.3.6.1.4.1.232.165.3.5upsBypassCPQPOWER-MIB
1.3.6.1.4.1.232.165.3.5.3upsBypassTableCPQPOWER-MIB
1.3.6.1.4.1.232.165.3.5.3.1upsBypassEntryCPQPOWER-MIB
1.3.6.1.4.1.232.165.3.5.3.1.2upsBypassVoltageCPQPOWER-MIB