All MIBs › CPQNIC-MIB › cpqNicIfLogMapStatus
cpqNicIfLogMapStatus
Module: CPQNIC-MIB
OID (symbolic): CPQNIC-MIB::cpqNicIfLogMapStatus
OID (numeric): 1.3.6.1.4.1.232.18.2.2.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of the logical group.
The following values are valid for the logical group status:
unknown(1) The instrument agent may not support this value. You may need to load a new instrument agent.
ok(2) The adapter group is functioning properly.
primaryFailed(3) The adapter specified as primary in the group has failed. the group is still functioning and one of the standby adapters has assumed the role of primary. Depending on the number of adapters in the group, redundancy may be lost.
standbyFailed(4) An adapter specified as standby or secondary in the group has failed. the group is still functioning and one of the standby adapters has assumed the role of primary. Depending on the number of adapters in the group, redundancy may be lost.
groupFailed(5) All adapters in the group have failed. Network connectivity has been lost for the group. This status will be returned for logical groups with a single physical adapter that has failed.
redundancyReduced(6) Atleast one adapter in the team has failed but there are more than one adapter available.
redundancyLost(7) Only one adapter in the team is functioning properly. If this adapter fails, the team will go to failed status.
What is cpqNicIfLogMapStatus?
This read-only enumeration reports the detailed status of the logical adapter group, including ok, primaryFailed, standbyFailed, groupFailed, redundancyReduced, and redundancyLost. An admin relies on this object to pinpoint exactly what kind of team degradation has occurred, distinguishing a failed primary (traffic still flowing via standby) from a fully failed group. For example, primaryFailed(3) tells an admin the team is still passing traffic through the standby member, so it's not yet an outage but redundancy has been lost and the primary NIC needs attention.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.18.2.2.1.1.11 snmpwalk -v2c -c public <target> CPQNIC-MIB::cpqNicIfLogMapStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.18.2.2.1.1.11.1 snmpget -v2c -c public <target> CPQNIC-MIB::cpqNicIfLogMapStatus.1
Start monitoring Compaq/HP ProLiant server (network interface card) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQNIC-MIB::cpqNicIfLogMapStatus OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (network interface card) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.18 | cpqNic | CPQNIC-MIB |
| 1.3.6.1.4.1.232.18.2 | cpqNicComponent | CPQNIC-MIB |
| 1.3.6.1.4.1.232.18.2.2 | cpqNicIfLogMap | CPQNIC-MIB |
| 1.3.6.1.4.1.232.18.2.2.1 | cpqNicIfLogMapTable | CPQNIC-MIB |
| 1.3.6.1.4.1.232.18.2.2.1.1 | cpqNicIfLogMapEntry | CPQNIC-MIB |
| 1.3.6.1.4.1.232.18.2.2.1.1.11 | cpqNicIfLogMapStatus | CPQNIC-MIB |