All MIBs › CPQCR-MIB › cpqCrPartitionStatus
cpqCrPartitionStatus
Module: CPQCR-MIB
OID (symbolic): CPQCR-MIB::cpqCrPartitionStatus
OID (numeric): 1.3.6.1.4.1.232.141.2.9.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Logical Drive Status.
The logical drive can be in one of the following states:
Good (2) Indicates that the logical drive is fully operational.
Reduced (3) Indicates that the logical drive is operating in a degraded or reduced state. One or more of the physical disks which make up the logical drive are either missing or failed, but the logical drive can continue to operate without data loss.
Failed (4) Indicates that the logical drive is not operational.
Reconstructing (5) Indicates that the logical drive is regenerating a failed physical drive's data onto a replacement drive that is part of the logical drive.
All user data remains available during the reconstruction process, but some performance reduction may occur when a request requires access to the device being reconstructed.
Initializing (6) Indicates that the controller is writing its file structure onto the logical drive's member devices.
What is cpqCrPartitionStatus?
This read-only enumerated value reports the operational state of a logical drive: good(2), reduced(3) if operating in a degraded state due to missing or failed member disks, failed(4), reconstructing(5), or initializing(6). An administrator monitors it to know whether a specific OS-visible volume is at risk, since a reduced logical drive can still serve data but without full redundancy. Seeing reduced(3) on a logical drive that hosts a critical application volume would push an admin to prioritize its underlying RAIDset's drive replacement.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.141.2.9.1.1.4 snmpwalk -v2c -c public <target> CPQCR-MIB::cpqCrPartitionStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.141.2.9.1.1.4.1 snmpget -v2c -c public <target> CPQCR-MIB::cpqCrPartitionStatus.1
Start monitoring Compaq/HP ProLiant server (component registry) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQCR-MIB::cpqCrPartitionStatus OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (component registry) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.141 | cpqClusteredRAID | CPQCR-MIB |
| 1.3.6.1.4.1.232.141.2 | cpqCrComponent | CPQCR-MIB |
| 1.3.6.1.4.1.232.141.2.9 | cpqCrPartition | CPQCR-MIB |
| 1.3.6.1.4.1.232.141.2.9.1 | cpqCrPartitionTable | CPQCR-MIB |
| 1.3.6.1.4.1.232.141.2.9.1.1 | cpqCrPartitionEntry | CPQCR-MIB |
| 1.3.6.1.4.1.232.141.2.9.1.1.4 | cpqCrPartitionStatus | CPQCR-MIB |