CPQCMC-MIB :: cpqCmcsetAudibleAlarm

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCPQCMC-MIBcpqCmcsetAudibleAlarm

cpqCmcsetAudibleAlarm

Module: CPQCMC-MIB

OID (symbolic): CPQCMC-MIB::cpqCmcsetAudibleAlarm

OID (numeric): 1.3.6.1.4.1.232.153.2.2.2.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Audible alarm in CMC unit: (2): silencing with button on CMC is enabled (3): silencing with button on CMC is disabled (4): audible alarm is off (general). On/off of audible alarm for each event is possible in cpqCmcsetupEvents-group

What is cpqCmcsetAudibleAlarm?

This read-write enumerated value controls the CMC's general audible alarm behavior: enableSilence(2) lets the CMC's own button silence an active alarm, disableSilence(3) prevents silencing via that button, and off(4) disables the audible alarm entirely; per-event audible alarms are configured separately in the setup-events group. An admin in a noise-sensitive data center might set this to off(4) globally while still controlling individual alarms elsewhere. If technicians complain about a loud buzzer they can't silence at the CMC front panel, an admin checks whether cpqCmcsetAudibleAlarm is set to disableSilence(3) and switches it to enableSilence(2).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.153.2.2.2.1.1.3
snmpwalk -v2c -c public <target> CPQCMC-MIB::cpqCmcsetAudibleAlarm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.232.153.2.2.2.1.1.3.1
snmpget -v2c -c public <target> CPQCMC-MIB::cpqCmcsetAudibleAlarm.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.232.153.2.2.2.1.1.3.1 i <value>

Start monitoring Legacy Compaq (HP) Cluster/Console Management Card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQCMC-MIB::cpqCmcsetAudibleAlarm OID value, configure state conditions and alerts, and monitor any Legacy Compaq (HP) Cluster/Console Management Card from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.232compaqCOMPAQ-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.232.153cpqCmcCPQCMC-MIB
1.3.6.1.4.1.232.153.2cpqCmcComponentCPQCMC-MIB
1.3.6.1.4.1.232.153.2.2cpqCmcDeviceCPQCMC-MIB
1.3.6.1.4.1.232.153.2.2.2cpqCmcSetupCPQCMC-MIB
1.3.6.1.4.1.232.153.2.2.2.1cpqCmcSetupConfigCPQCMC-MIB
1.3.6.1.4.1.232.153.2.2.2.1.1cpqCmcSetupGeneralCPQCMC-MIB
1.3.6.1.4.1.232.153.2.2.2.1.1.3cpqCmcsetAudibleAlarmCPQCMC-MIB