CPQCMC-MIB :: cpqCmcStatusShock

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCPQCMC-MIBcpqCmcStatusShock

cpqCmcStatusShock

Module: CPQCMC-MIB

OID (symbolic): CPQCMC-MIB::cpqCmcStatusShock

OID (numeric): 1.3.6.1.4.1.232.153.2.2.4.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Status Shock sensor, OK (2), shock detected (3) or no sensor connected (4)

What is cpqCmcStatusShock?

This read-only enumerated value reports the shock sensor's condition: cleared(2), present(3), or no sensor connected(4). An administrator uses it to detect physical impacts to the cabinet, such as from an accidental collision or an attempted break-in. A transition to present(3) would prompt a check of the equipment for physical damage after a detected impact.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.153.2.2.4.14
snmpwalk -v2c -c public <target> CPQCMC-MIB::cpqCmcStatusShock

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.232.153.2.2.4.14.1
snmpget -v2c -c public <target> CPQCMC-MIB::cpqCmcStatusShock.1

Start monitoring Legacy Compaq (HP) Cluster/Console Management Card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQCMC-MIB::cpqCmcStatusShock OID value, configure state conditions and alerts, and monitor any Legacy Compaq (HP) Cluster/Console Management Card from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.232compaqCOMPAQ-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.232.153cpqCmcCPQCMC-MIB
1.3.6.1.4.1.232.153.2cpqCmcComponentCPQCMC-MIB
1.3.6.1.4.1.232.153.2.2cpqCmcDeviceCPQCMC-MIB
1.3.6.1.4.1.232.153.2.2.4cpqCmcStatusCPQCMC-MIB
1.3.6.1.4.1.232.153.2.2.4.14cpqCmcStatusShockCPQCMC-MIB