All MIBs › CPQCMC-MIB › cpqCmcStatusLock2Lock
cpqCmcStatusLock2Lock
Module: CPQCMC-MIB
OID (symbolic): CPQCMC-MIB::cpqCmcStatusLock2Lock
OID (numeric): 1.3.6.1.4.1.232.153.2.2.4.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of door locking 2 (2) Door locking-device is activated, door is locked (3) Door locking-device is not activated, door is unlocked by Network Management (4) Door locking-device is not activated for x sec, time see cpqCmcSetupLock1Time, door is unlocked by Network Management (5) Door locking-device is not activated, door is unlocked because of Smoke alarm (6) Door is unlocked from remote-signal (7) Door locking-device is not activated, door is unlocked because of Power Fail of locking device (8) Door locking-device is not activated, door is unlocked because of low Battery of locking device (9) Door locking-device is not activated, door is unlocked because of Network Fail (10)Door locking-device is not activated, door is unlocked because of connection fail, no connection locking device <-> CMC (11)Door locking-device is ready to lock, lock will be activated after doors are closed (12)Door locking-device is activated but door is not locked, alarm (13)Configuration error, association door to locking-device missing (14)Lock not installed
What is cpqCmcStatusLock2Lock?
This read-only enumerated value reports the current state of door-locking device 2, distinguishing locked from various unlocked reasons such as network-management command, timed unlock, smoke alarm, remote signal, or power failure. It provides the same visibility as cpqCmcStatusLock1Lock but for the cabinet's second locking mechanism. An admin seeing unlockedPwrFail(7) on lock 2 would know that device lost power and defaulted open rather than being deliberately unlocked.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.153.2.2.4.12 snmpwalk -v2c -c public <target> CPQCMC-MIB::cpqCmcStatusLock2Lock
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.153.2.2.4.12.1 snmpget -v2c -c public <target> CPQCMC-MIB::cpqCmcStatusLock2Lock.1
Start monitoring Legacy Compaq (HP) Cluster/Console Management Card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQCMC-MIB::cpqCmcStatusLock2Lock OID value, configure state conditions and alerts, and monitor any Legacy Compaq (HP) Cluster/Console Management Card from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.153 | cpqCmc | CPQCMC-MIB |
| 1.3.6.1.4.1.232.153.2 | cpqCmcComponent | CPQCMC-MIB |
| 1.3.6.1.4.1.232.153.2.2 | cpqCmcDevice | CPQCMC-MIB |
| 1.3.6.1.4.1.232.153.2.2.4 | cpqCmcStatus | CPQCMC-MIB |
| 1.3.6.1.4.1.232.153.2.2.4.12 | cpqCmcStatusLock2Lock | CPQCMC-MIB |