All MIBs › CPQAPPG80-MIB › cpqSMASubsystemEMUFanspeed
cpqSMASubsystemEMUFanspeed
Module: CPQAPPG80-MIB
OID (symbolic): CPQAPPG80-MIB::cpqSMASubsystemEMUFanspeed
OID (numeric): 1.3.6.1.4.1.232.151.100.2.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Subsystem Fanspeed.
FANSPEED=HIGH forces the fans in all connected cabinets to operate at high speed continuously.
FANSPEED=AUTOMATIC allows the EMU to control the fan speed for the fans in all connected cabinets.
The EMU instructs the fans to operate at high speed when any of the temperature setpoints are exceeded or when one or more fans are not functioning.
What is cpqSMASubsystemEMUFanspeed?
This object reports the subsystem's fan speed mode: high(1) forces all connected cabinet fans to run at maximum speed continuously, while automatic(2) lets the EMU control fan speed based on temperature and fan health. An admin monitoring cooling would expect this to normally read automatic, with the EMU switching to high only when a temperature setpoint is exceeded or a fan has failed. Seeing the value stuck at high without an obvious cause would prompt the admin to check for a failed fan or an ongoing over-temperature condition.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.151.100.2.1.1.10 snmpwalk -v2c -c public <target> CPQAPPG80-MIB::cpqSMASubsystemEMUFanspeed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.151.100.2.1.1.10.1 snmpget -v2c -c public <target> CPQAPPG80-MIB::cpqSMASubsystemEMUFanspeed.1
Start monitoring Compaq/HP StorageWorks SAN Appliance (HSG80-based, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQAPPG80-MIB::cpqSMASubsystemEMUFanspeed OID value, configure state conditions and alerts, and monitor any Compaq/HP StorageWorks SAN Appliance (HSG80-based, legacy) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.151 | cpqSanAppliance | CPQAPPG80-MIB |
| 1.3.6.1.4.1.232.151.100 | cpqsmav1 | CPQAPPG80-MIB |
| 1.3.6.1.4.1.232.151.100.2 | cpqSMASubsystem | CPQAPPG80-MIB |
| 1.3.6.1.4.1.232.151.100.2.1 | cpqSMASubsystemTable | CPQAPPG80-MIB |
| 1.3.6.1.4.1.232.151.100.2.1.1 | cpqSMASubsystemEntry | CPQAPPG80-MIB |
| 1.3.6.1.4.1.232.151.100.2.1.1.10 | cpqSMASubsystemEMUFanspeed | CPQAPPG80-MIB |