CPQAPPG80-MIB :: cpqSMASnapshotPreferredPath

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › CPQAPPG80-MIB › cpqSMASnapshotPreferredPath

cpqSMASnapshotPreferredPath

Module: CPQAPPG80-MIB

OID (symbolic): CPQAPPG80-MIB::cpqSMASnapshotPreferredPath

OID (numeric): 1.3.6.1.4.1.232.151.100.9.1.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Snapshot PreferredPath.

May be set only when dual redundant controllers are operating in a multiple-bus failover configuration.

What is cpqSMASnapshotPreferredPath?

This read-only enumerated value (this(1), other(2), none(3)) indicates which controller path a snapshot prefers, and only applies when dual redundant controllers run in a multiple-bus failover configuration. An admin checks it to understand which controller should normally be handling I/O to that snapshot under normal conditions. If cpqSMASnapshotPreferredPath is set to other(2) but the snapshot is being served by 'this' controller, the admin knows a failover has occurred.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.151.100.9.1.1.7
snmpwalk -v2c -c public <target> CPQAPPG80-MIB::cpqSMASnapshotPreferredPath

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.232.151.100.9.1.1.7.1
snmpget -v2c -c public <target> CPQAPPG80-MIB::cpqSMASnapshotPreferredPath.1

Start monitoring Compaq/HP StorageWorks SAN Appliance (HSG80-based, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQAPPG80-MIB::cpqSMASnapshotPreferredPath OID value, configure state conditions and alerts, and monitor any Compaq/HP StorageWorks SAN Appliance (HSG80-based, legacy) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.232compaqCOMPAQ-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.232.151cpqSanApplianceCPQAPPG80-MIB
1.3.6.1.4.1.232.151.100cpqsmav1CPQAPPG80-MIB
1.3.6.1.4.1.232.151.100.9cpqSMASnapshotCPQAPPG80-MIB
1.3.6.1.4.1.232.151.100.9.1cpqSMASnapshotTableCPQAPPG80-MIB
1.3.6.1.4.1.232.151.100.9.1.1cpqSMASnapshotEntryCPQAPPG80-MIB
1.3.6.1.4.1.232.151.100.9.1.1.7cpqSMASnapshotPreferredPathCPQAPPG80-MIB