CPQAPPG80-MIB :: cpqSMALogicalDiskIdentifierSwitch

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › CPQAPPG80-MIB › cpqSMALogicalDiskIdentifierSwitch

cpqSMALogicalDiskIdentifierSwitch

Module: CPQAPPG80-MIB

OID (symbolic): CPQAPPG80-MIB::cpqSMALogicalDiskIdentifierSwitch

OID (numeric): 1.3.6.1.4.1.232.151.100.4.1.1.20

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Logical Drive Identifier switch.

This is used with the SCSI_VERSION switch when the SCSI version is set to SCSI-3 mode. The IDENTIFIER switch creates a unique unit identifier makes the unit visible to the host.This number can be a value between 1-9999. The value 0 means NOIDENTIFIER.

What is cpqSMALogicalDiskIdentifierSwitch?

This object gives the SCSI-3 identifier switch value, from 1 to 9999, used with the SCSI version switch to create a unique unit identifier that makes the unit visible to the host in SCSI-3 mode; a value of 0 means no identifier is set. An admin presenting a new LUN to a host running in SCSI-3 mode would need to confirm this identifier is properly assigned rather than left at 0. For example, a LUN stuck at 0 in a SCSI-3 environment might fail to appear correctly to the host until this identifier is configured.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.151.100.4.1.1.20
snmpwalk -v2c -c public <target> CPQAPPG80-MIB::cpqSMALogicalDiskIdentifierSwitch

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.232.151.100.4.1.1.20.1
snmpget -v2c -c public <target> CPQAPPG80-MIB::cpqSMALogicalDiskIdentifierSwitch.1

Start monitoring Compaq/HP StorageWorks SAN Appliance (HSG80-based, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQAPPG80-MIB::cpqSMALogicalDiskIdentifierSwitch OID value, configure state conditions and alerts, and monitor any Compaq/HP StorageWorks SAN Appliance (HSG80-based, legacy) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.232compaqCOMPAQ-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.232.151cpqSanApplianceCPQAPPG80-MIB
1.3.6.1.4.1.232.151.100cpqsmav1CPQAPPG80-MIB
1.3.6.1.4.1.232.151.100.4cpqSMALogicalDiskCPQAPPG80-MIB
1.3.6.1.4.1.232.151.100.4.1cpqSMALogicalDiskTableCPQAPPG80-MIB
1.3.6.1.4.1.232.151.100.4.1.1cpqSMALogicalDiskEntryCPQAPPG80-MIB
1.3.6.1.4.1.232.151.100.4.1.1.20cpqSMALogicalDiskIdentifierSwitchCPQAPPG80-MIB