All MIBs › CONV-MIB › cxFwkServiceRouteRef
cxFwkServiceRouteRef
Module: CONV-MIB
OID (symbolic): CONV-MIB::cxFwkServiceRouteRef
OID (numeric): 1.3.6.1.4.1.495.2.1.6.8.2.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines a routing reference number. This number provides a reference for WAN service providers that offer multiplexing (it is required in situations where multiple convergence ports are multiplexed over the same DLCI).
If the WAN provider doesn't provide multiplexing, then the object should be set to 0.
If the WAN provider does provide multiplexing, a value of 0 instructs the provider not to multiplex other LAN traffic over the same circuit and the frame must be sent as received (regular RFC 1490 encapsulation in the case of frame relay service provider). If the value is set to other than 0 (1-255), the provider will use this number as a reference in its multiplexing encapsulation header. Each reference within the same WAN circuit must be unique.
Range of Values: 0-255
Default Value: None
Configuration Changed: administrative
What is cxFwkServiceRouteRef?
A read-write integer providing a routing reference number used by WAN providers that support multiplexing multiple convergence ports over the same DLCI, with 0 meaning the frame is sent as received without additional multiplexing instruction. An admin sets this only when the WAN provider actually offers multiplexing and needs a reference number to correctly route multiplexed traffic; otherwise it's left at 0. If a WAN provider that supports multiplexing reports frames arriving without the expected routing tag, the admin would check that cxFwkServiceRouteRef was set to the value the provider requires instead of being left at 0.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.8.2.1.13 snmpwalk -v2c -c public <target> CONV-MIB::cxFwkServiceRouteRef
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.8.2.1.13.1 snmpget -v2c -c public <target> CONV-MIB::cxFwkServiceRouteRef.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.8.2.1.13.1 i <value>
Start monitoring Protocol conversion gateway/WAN media translation device (vendor unclear) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CONV-MIB::cxFwkServiceRouteRef OID value, configure state conditions and alerts, and monitor any Protocol conversion gateway/WAN media translation device (vendor unclear) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.8 | cxConv | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.8.2 | cxFwkCircuitTable | CONV-MIB |
| 1.3.6.1.4.1.495.2.1.6.8.2.1 | cxFwkCircuitEntry | CONV-MIB |
| 1.3.6.1.4.1.495.2.1.6.8.2.1.13 | cxFwkServiceRouteRef | CONV-MIB |