All MIBs › CONV-MIB › cxConvCompression
cxConvCompression
Module: CONV-MIB
OID (symbolic): CONV-MIB::cxConvCompression
OID (numeric): 1.3.6.1.4.1.495.2.1.6.8.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines whether the port is linked to a compression port. If the port is not linked to a compression port the value is 0. If the port is linked to a compression port, then the object identifies the compression port number (CompressPortNumber on CompressTable.)
Range of Values: 0 to 64.
Default Value: 0.
Configuration Changed: administrative
What is cxConvCompression?
A read-write integer identifying which compression port, if any, this convergence port is linked to, with 0 meaning no compression link is configured. Linking a convergence port to a compression port lets the system reduce bandwidth usage on that circuit, so an admin checks this value to confirm whether compression is actually in effect for a given port. If a convergence port is expected to use compression but cxConvCompression reads 0, the admin would know the compression link was never actually configured despite the intent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.8.1.1.6 snmpwalk -v2c -c public <target> CONV-MIB::cxConvCompression
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.8.1.1.6.1 snmpget -v2c -c public <target> CONV-MIB::cxConvCompression.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.8.1.1.6.1 i <value>
Start monitoring Protocol conversion gateway/WAN media translation device (vendor unclear) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CONV-MIB::cxConvCompression OID value, configure state conditions and alerts, and monitor any Protocol conversion gateway/WAN media translation device (vendor unclear) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.8 | cxConv | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.8.1 | cxConvTable | CONV-MIB |
| 1.3.6.1.4.1.495.2.1.6.8.1.1 | cxConvEntry | CONV-MIB |
| 1.3.6.1.4.1.495.2.1.6.8.1.1.6 | cxConvCompression | CONV-MIB |