All MIBs › COMPAQ-AGENT-MIB › agentSwitchTempSensorThreshold
agentSwitchTempSensorThreshold
Module: COMPAQ-AGENT-MIB
OID (symbolic): COMPAQ-AGENT-MIB::agentSwitchTempSensorThreshold
OID (numeric): 1.3.6.1.4.1.232.161.3.3.4.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This is the threshold temperature sensor setting in degrees celsius. This is the temperature in which the sensor will be considered to be in a tripped state this causing some action to occur depending on the type of the sensor. The action of temperature sensor threshold will be indicated by the cpqRackCommonEnclosureTempType item. If the type is blowout(5), then the temperature sensor will cause the fans to speed up. If the type is caution(9), then the temperature sensor is in a degraded state. If the type is critical(15), then the server will be considered as in a failed state.
If this value cannot be determined by software, then a value of -1 will be returned.
What is agentSwitchTempSensorThreshold?
This read-only integer reports the configured trip-point temperature, in degrees Celsius, for a specific sensor, above which the sensor is considered tripped and triggers an action such as increasing fan speed for a blowout-type sensor. An administrator uses this threshold value to understand at what point a given sensor's rising temperature will cause the system to react. For example, an operator troubleshooting why fans suddenly sped up would compare the live reading in agentSwitchTempSensorCurrent against agentSwitchTempSensorThreshold to confirm the sensor tripped.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.161.3.3.4.1.1.3 snmpwalk -v2c -c public <target> COMPAQ-AGENT-MIB::agentSwitchTempSensorThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.161.3.3.4.1.1.3.1 snmpget -v2c -c public <target> COMPAQ-AGENT-MIB::agentSwitchTempSensorThreshold.1
Start monitoring Compaq/HP ProLiant server (legacy SNMP agent) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COMPAQ-AGENT-MIB::agentSwitchTempSensorThreshold OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (legacy SNMP agent) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| 1.3.6.1.4.1.232.161 | compaq_proLiantBLeClassCG_proLiantBLpClassGbE | COMPAQ-ID-REC-MIB |
| 1.3.6.1.4.1.232.161.3 | compaq_common_mgmt | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.161.3.3 | agentSwitchCommonMgmt | COMPAQ-AGENT-MIB |
| 1.3.6.1.4.1.232.161.3.3.4 | agentSwitchTempSensor | COMPAQ-AGENT-MIB |
| 1.3.6.1.4.1.232.161.3.3.4.1 | agentSwitchTempSensorTable | COMPAQ-AGENT-MIB |
| 1.3.6.1.4.1.232.161.3.3.4.1.1 | agentSwitchTempSensorEntry | COMPAQ-AGENT-MIB |
| 1.3.6.1.4.1.232.161.3.3.4.1.1.3 | agentSwitchTempSensorThreshold | COMPAQ-AGENT-MIB |