COMMON-4RF

All MIBs › COMMON-4RF

Organization: www.4rf.com

Last Updated: 2007-04-30

Category: Vendor: 4RF

Description: Common MIB definitions for 4RF Communications microwave and point-to-point radio link equipment management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is COMMON-4RF?

COMMON-4RF is a vendor-specific MIB module from 4RF Communications used to manage the company's family of microwave and point-to-point wireless radio link equipment. It exposes system-level identification and configuration data such as IP addressing, subnet mask, default gateway, and system date/time, alongside serial number and software version information. It supports monitoring of hardware and software status through objects like last-reset time (revealing unexpected reboots), software version (for firmware compliance), and remote IP reachability of the far-end radio. It is a self-contained common object set reused across the 4RF product line with no significant dependency on external standard MIBs beyond basic SMI conventions. It is typically deployed in telecom/utility microwave backhaul networks, polled by an NMS for configuration audit and fault diagnosis. Engineers can download the COMMON-4RF file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in COMMON-4RF. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

4RF microwave radio
point-to-point wireless link equipment

Monitoring Examples

An operator would poll fourRFSystemSoftwareVersion and fourRFSystemSerialNumber to confirm firmware consistency across a fleet of radios, and check fourRFSystemLastReset to detect unexpected reboots indicating power or hardware faults. fourRFSystemIpAddress and fourRFSystemRemoteIpAddress let a management station verify local and remote-end IP addressing of a point-to-point microwave link. fourRFMibBackup indicates whether the current configuration has been backed up, and fourRFReset can be correlated with observed outages during maintenance windows.

What Can Be Monitored

software version
last reset time/cause
IP address/gateway configuration
system date and time
serial number
MIB backup status

Imported Objects

From COMMON-TC-4RF

FourRFFileSize
FourRFImageStatus
FourRFImageType
FourRFImageVersion
FourRFProcessResultType
FourRFResetType
FourRFSerialNumber
FourRFTftpFileName
FourRFTimeZone
FourRFWebUserEnabled
FourRFWebUserGroup

From MIB-4RF

fourRFGeneric	OBJECT-IDENTITY
fourRFModules	OBJECT-IDENTITY

From PRODUCTS-MIB-4RF

fourRFCommon

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
fourRFCommonModule	1.3.6.1.4.1.14817.2.3			Common 4RF MIB Objects.
fourRFGroups	1.3.6.1.4.1.14817.7.1.1			The root of the OID sub-tree for the 4RF common object groups.
fourRFSystemGroup	1.3.6.1.4.1.14817.7.1.1.1			The 4RF common system settings group.
fourRFResetGroup	1.3.6.1.4.1.14817.7.1.1.2			The 4RF common reset group.
fourRFMibBackupGroup	1.3.6.1.4.1.14817.7.1.1.3			The 4RF common configuration backup group.
fourRFUploadGroup	1.3.6.1.4.1.14817.7.1.1.4			The 4RF common file upload group.
fourRFImageControlGroup	1.3.6.1.4.1.14817.7.1.1.6			The 4RF common image control group.
fourRFObjects	1.3.6.1.4.1.14817.7.1.2			The root of the OID sub-tree for the 4RF common objects.
fourRFSystem	1.3.6.1.4.1.14817.7.1.2.1
STR fourRFSystemID	1.3.6.1.4.1.14817.7.1.2.1.1	DisplayString	read-write	The terminal identifier, user defined.
FOU fourRFSystemSoftwareVersion	1.3.6.1.4.1.14817.7.1.2.1.2	FourRFImageVersion	read-only	The terminal software version details.
IP fourRFSystemIpAddress	1.3.6.1.4.1.14817.7.1.2.1.3	IpAddress	read-write	IP address of terminal, care should be taken when changing this value.
IP fourRFSystemRemoteIpAddress	1.3.6.1.4.1.14817.7.1.2.1.4	IpAddress	read-write	IP address of remote terminal, this is the other end of the radio link. This must be configured at commissioning.
IP fourRFSystemSubnetMask	1.3.6.1.4.1.14817.7.1.2.1.5	IpAddress	read-write	The subnet mask for the terminal. This must be configured at commissioning.
IP fourRFSystemDefaultGateway	1.3.6.1.4.1.14817.7.1.2.1.6	IpAddress	read-write	The default gateway for the terminal. This must be configured at commissioning.
INT fourRFSystemIpAssignment	1.3.6.1.4.1.14817.7.1.2.1.7	INTEGER	read-write	This indicates how the terminal IP address is configured. This must be configured at commissioning. The IP address can be assigned manually or by a DHCP server.
U32 fourRFSystemDateAndTime	1.3.6.1.4.1.14817.7.1.2.1.8	Unsigned32	read-write	This indicates the current time from the terminal's real-time clock, the time is measured in seconds since Midnight GMT on January 1 1970.
IP fourRFSystemTftpServerAddress	1.3.6.1.4.1.14817.7.1.2.1.9	IpAddress	read-write	IP address of TFTP server used for uploading and downloading files.
FOU fourRFSystemSerialNumber	1.3.6.1.4.1.14817.7.1.2.1.10	FourRFSerialNumber	read-only	The unique serial number for the terminal.
FOU fourRFSystemLastReset	1.3.6.1.4.1.14817.7.1.2.1.11	FourRFResetType	read-only	The type of the last system reset.
I32 fourRFSystemTimeZone	1.3.6.1.4.1.14817.7.1.2.1.12	Integer32	read-write	This indicates the offset from UTC time in minutes.
IP fourRFSystemSyslogAddress	1.3.6.1.4.1.14817.7.1.2.1.13	IpAddress	read-write	The IP address of a remote syslogd server used to log system events.
U32 fourRFSystemSyslogPort	1.3.6.1.4.1.14817.7.1.2.1.14	Unsigned32	read-write	The port to use when logging to a remote syslogd, the default is port 514.
INT fourRFSystemTimeDaylightSavings	1.3.6.1.4.1.14817.7.1.2.1.15	INTEGER	read-write	Indicates whether daylight savings is in use.
FOU fourRFSystemTimeZoneGMTOffset	1.3.6.1.4.1.14817.7.1.2.1.16	FourRFTimeZone	read-write	This indicates the timezone offset from GMT.
STR fourRFSystemMACAddress	1.3.6.1.4.1.14817.7.1.2.1.17	DisplayString	read-only	The MAC Address for the terminal.
IP fourRFSystemLocalRadioBIpAddress	1.3.6.1.4.1.14817.7.1.2.1.18	IpAddress	read-write	IP address of local Radio B terminal, this is the partner radio of a SD link. This must be configured at commissioning.
IP fourRFSystemRemoteRadioBIpAddress	1.3.6.1.4.1.14817.7.1.2.1.19	IpAddress	read-write	IP address of remote Radio B terminal, this is the partner radio of a SD link. This must be configured at commissioning.
IP fourRFSystemLocalRadioAIpAddress	1.3.6.1.4.1.14817.7.1.2.1.20	IpAddress	read-write	IP address of local Radio A terminal, this is the partner radio of a SD link. This must be configured at commissioning.
fourRFReset	1.3.6.1.4.1.14817.7.1.2.2
INT fourRFResetType	1.3.6.1.4.1.14817.7.1.2.2.1	INTEGER	read-write	Identifies the type of reset operation: none - do nothing! hardReset - complete reset of all components softReset - reset of the CPU only, traffic is unaffected. The values mirror the ResetType textual convention but the user cannot instigate a watchdog reset. This value is not therefore not allowed.
U32 fourRFResetTime	1.3.6.1.4.1.14817.7.1.2.2.2	Unsigned32	read-write	Identifies the time of a delayed reset operation. This allows an absolute time to be specified based on the system real-time clock. The time is measured in seconds since Midnight GMT on January 1 1970.
INT fourRFResetCommand	1.3.6.1.4.1.14817.7.1.2.2.3	INTEGER	read-write	Command to instigate or cancel a system reset, the reset may happen immediately or at a specified time. Only a timed reset can be cancelled.
fourRFMibBackup	1.3.6.1.4.1.14817.7.1.2.3
FOU fourRFMibBackupFile	1.3.6.1.4.1.14817.7.1.2.3.1	FourRFTftpFileName	read-write	Path and file name for remote (TFTP) backup, relative to TFTP root.
INT fourRFMibBackupCommand	1.3.6.1.4.1.14817.7.1.2.3.2	INTEGER	read-write	Configuration command to backup a configuration setting the value to localBackup or remoteBackup will instigate the backup. A local backup simply stores the current MIB configuration into Flash memory in the terminal. A remoteBackup uploads the MIB configuration to the currently specified TFTP server
FOU fourRFMibBackupResult	1.3.6.1.4.1.14817.7.1.2.3.3	FourRFProcessResultType	read-only	Configuration backup status, if no backup has been performed the value is none otherwise the result from the last backup will be returned. If a backup is in progress executing is returned.
fourRFUpload	1.3.6.1.4.1.14817.7.1.2.4
FOU fourRFUploadType	1.3.6.1.4.1.14817.7.1.2.4.1	FourRFImageType	read-write	Identifies the type of image to be uploaded.
FOU fourRFUploadFile	1.3.6.1.4.1.14817.7.1.2.4.2	FourRFTftpFileName	read-write	Path and file name for remote (TFTP) upload/download, relative to the TFTP server root.
INT fourRFUploadCommand	1.3.6.1.4.1.14817.7.1.2.4.3	INTEGER	read-write	Command used to instigate a file upload.
FOU fourRFUploadResult	1.3.6.1.4.1.14817.7.1.2.4.4	FourRFProcessResultType	read-only	Status of a file upload, this will have to be polled to follow the upload progress.
fourRFImageTable	1.3.6.1.4.1.14817.7.1.2.5		not-accessible	This table is used to report the image information for each image stored in flash.
fourRFImageTableEntry	1.3.6.1.4.1.14817.7.1.2.5.1		not-accessible	Identifies the image table index.
I32 fourRFImageIndex	1.3.6.1.4.1.14817.7.1.2.5.1.1	Integer32	not-accessible	The image table index.
FOU fourRFImageType	1.3.6.1.4.1.14817.7.1.2.5.1.2	FourRFImageType	read-only	The type of image, kernel, rootfs or firmware.
FOU fourRFImageStatus	1.3.6.1.4.1.14817.7.1.2.5.1.3	FourRFImageStatus	read-only	The image status, if current then the image is the current running image. If selected the image will be used following the next system reboot.
FOU fourRFImageSize	1.3.6.1.4.1.14817.7.1.2.5.1.4	FourRFFileSize	read-only	The image size in bytes.
FOU fourRFImageVersion	1.3.6.1.4.1.14817.7.1.2.5.1.5	FourRFImageVersion	read-only	The image version, string which can be used to identify the image. This may include the firmware type, version number or the build date. The exect format of this string will product and/or image specific.
fourRFImageControl	1.3.6.1.4.1.14817.7.1.2.6
I32 fourRFImageTableIndex	1.3.6.1.4.1.14817.7.1.2.6.1	Integer32	read-write	The image table index, the table entry to be updated.
INT fourRFImageTableCommand	1.3.6.1.4.1.14817.7.1.2.6.2	INTEGER	read-write	Allows an image to be activated or deactivated, activating an image will change its state to selected but the new image will only be used following a reboot of the system.
fourRFWebUserManagementTable	1.3.6.1.4.1.14817.7.1.2.7		not-accessible	This table is used to view and modify the current web interface users. Up to 16 different users may be defined.
fourRFWebUserEntry	1.3.6.1.4.1.14817.7.1.2.7.1		not-accessible	Identifies the user management table index.
I32 fourRFWebUserIndex	1.3.6.1.4.1.14817.7.1.2.7.1.1	Integer32	not-accessible	The user management table index.
STR fourRFWebUserName	1.3.6.1.4.1.14817.7.1.2.7.1.2	DisplayString	read-write	The web user name.
OCT fourRFWebUserPassword	1.3.6.1.4.1.14817.7.1.2.7.1.3	OCTET STRING	read-write	The password entry of a given user.
FOU fourRFWebUserGroup	1.3.6.1.4.1.14817.7.1.2.7.1.4	FourRFWebUserGroup	read-write	The group to which the user belongs.
FOU fourRFWebUserEnabled	1.3.6.1.4.1.14817.7.1.2.7.1.5	FourRFWebUserEnabled	read-write	Determines if the user is enabled.
OCT fourRFWebUserPasswordConfirm	1.3.6.1.4.1.14817.7.1.2.7.1.6	OCTET STRING	read-write	Dummy OID used for password confirmation in the web management interface.
fourRFEvents	1.3.6.1.4.1.14817.7.1.3			The root of the OID sub-tree for the 4RF common events.
fourRFEventsV2	1.3.6.1.4.1.14817.7.1.3.0			The root of the OID sub-tree for the 4RF common events.
NTF fourRFResetEvent	1.3.6.1.4.1.14817.7.1.3.0.1			Event indicating that a system reset is about to occur.
NTF fourRFMibBackupStatusEvent	1.3.6.1.4.1.14817.7.1.3.0.2			Event indicating the status of a configuration backup operation.
NTF fouRFUploadStatusEvent	1.3.6.1.4.1.14817.7.1.3.0.3			Event indicating the status of a file upload operation.

RFC description

Common 4RF Communications MIB providing text conventions and basic objects for 4RF products.

Start monitoring 4RF (Aviat Networks) microwave/point-to-point radio with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download COMMON-4RF

What Is COMMON-4RF?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

RFC description