All MIBs › CMM3-MIB › snmpTrap2
snmpTrap2
Module: CMM3-MIB
OID (symbolic): CMM3-MIB::snmpTrap2
OID (numeric): 1.3.6.1.4.1.161.19.3.4.3.35
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: SNMP Trap Address 2.
What is snmpTrap2?
This read-write IpAddress stores the 2th of up to ten trap-receiver destinations the CMM-III will send SNMP traps to. Configuring multiple trap addresses like this one lets an operator fan alerts from this switch out to several monitoring stations at once. For instance, an admin could set snmpTrap2 to the IP of a secondary NOC server so it also receives chassis alarms alongside the primary manager.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.161.19.3.4.3.35 snmpwalk -v2c -c public <target> CMM3-MIB::snmpTrap2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.161.19.3.4.3.35.1 snmpget -v2c -c public <target> CMM3-MIB::snmpTrap2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.161.19.3.4.3.35.1 a <value>
Start monitoring cable headend hardware modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CMM3-MIB::snmpTrap2 OID value, configure state conditions and alerts, and monitor any cable headend hardware modules from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.161 | mot | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19 | whispRoot | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19.3 | whispProducts | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19.3.4 | whispCMM | WHISP-GLOBAL-REG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.161.19.3.4.3 | cmmConfig | CMM3-MIB |
| 1.3.6.1.4.1.161.19.3.4.3.35 | snmpTrap2 | CMM3-MIB |