CMM3-MIB :: linkSpeed

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCMM3-MIBlinkSpeed

linkSpeed

Module: CMM3-MIB

OID (symbolic): CMM3-MIB::linkSpeed

OID (numeric): 1.3.6.1.4.1.161.19.3.4.4.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Network connectivity, 100BaseT or 10BaseT.

What is linkSpeed?

This read-only enumeration reports the detected link speed on a port as either hundredBaseT(1) or tenBaseT(0). It gives an admin a live view of what speed a connected device actually negotiated, which should be cross-checked against the corresponding portNConfig setting. If linkSpeed reports tenBaseT(0) on a port that was configured for 100 Mbit/s, that mismatch points to a cabling or negotiation problem on that link.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.161.19.3.4.4.1.1.3
snmpwalk -v2c -c public <target> CMM3-MIB::linkSpeed

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.161.19.3.4.4.1.1.3.1
snmpget -v2c -c public <target> CMM3-MIB::linkSpeed.1

Start monitoring cable headend hardware modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CMM3-MIB::linkSpeed OID value, configure state conditions and alerts, and monitor any cable headend hardware modules from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.161motWHISP-GLOBAL-REG-MIB
1.3.6.1.4.1.161.19whispRootWHISP-GLOBAL-REG-MIB
1.3.6.1.4.1.161.19.3whispProductsWHISP-GLOBAL-REG-MIB
1.3.6.1.4.1.161.19.3.4whispCMMWHISP-GLOBAL-REG-MIB
Numeric OIDNameModule
1.3.6.1.4.1.161.19.3.4.4cmmStatusCMM3-MIB
1.3.6.1.4.1.161.19.3.4.4.1cmmPortTableCMM3-MIB
1.3.6.1.4.1.161.19.3.4.4.1.1cmmPortEntryCMM3-MIB
1.3.6.1.4.1.161.19.3.4.4.1.1.3linkSpeedCMM3-MIB