lan1Ip
Module: CMM3-MIB
OID (symbolic): CMM3-MIB::lan1Ip
OID (numeric): 1.3.6.1.4.1.161.19.3.4.3.2
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: LAN 1 IP.
What is lan1Ip?
This read-write IpAddress sets the management IP address for the CMM-III's LAN 1 interface. It is the address an administrator uses to reach the unit's web interface, telnet, or SNMP agent over that network port, so getting it right is a prerequisite for any remote management. For example, an installer configuring a new chassis on-site would set lan1Ip to an address on the site's management subnet before handing the unit off to remote monitoring.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.161.19.3.4.3.2 snmpwalk -v2c -c public <target> CMM3-MIB::lan1Ip
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.161.19.3.4.3.2.1 snmpget -v2c -c public <target> CMM3-MIB::lan1Ip.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.161.19.3.4.3.2.1 a <value>
Start monitoring cable headend hardware modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CMM3-MIB::lan1Ip OID value, configure state conditions and alerts, and monitor any cable headend hardware modules from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.161 | mot | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19 | whispRoot | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19.3 | whispProducts | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19.3.4 | whispCMM | WHISP-GLOBAL-REG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.161.19.3.4.3 | cmmConfig | CMM3-MIB |
| 1.3.6.1.4.1.161.19.3.4.3.2 | lan1Ip | CMM3-MIB |